Bedienungsanleitung Skil 0580 (Seite 5 von 40) (Alle Sprachen)

591225

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Digital angle finder 0580

INTRODUCTION

• This measuring tool is intended for digitally measuring

and deﬁ ning angles from 0° to 220° (horizontal and

vertical)

• Read this instruction manual carefully before use and

save it for future reference 2

TECHNICAL SPECIFICATIONS

Material aluminium

Measuring range 0° - 220°

Measuring accuracy

- angle +/- 0.5°

- bubble level 1 mm/m

Lowest indication unit 0.1°

Power supply 1x 6LR61/9V battery

Estimated battery life 20 hours

Operating temperature -10°C to 50°C

Storage temperature -20ºC to 70°C

Automatic switch-off after approx. 5 min. of inactivity

Length 380 mm

Weight 0,18 kg

TOOL ELEMENTS 1

A On/off button

B “HOLD” button for retaining measured values

C LCD display

D Bubble level for horizontal planes

E Bubble level for vertical planes

F Base leg

G Fold-out leg with 32 cm ruler

H Battery compartment cover

J Low battery level indicator

K Retain mode (“HOLD”) indicator

USE

• Mounting of battery 3

- use exclusively alkaline-manganese or rechargeable

batteries

- remove cover H

- insert 9V battery (pay attention to correct

polarisation)

- mount cover H

- when battery level is low, symbol J 1 will appear in

display

- when symbol J 1 appears in the display for the ﬁ rst

time, measuring is still possible but with reduced

accuracy; replace the battery

- always remove the battery from the tool, if the tool

will not be used for a long period

• On/off

- switch on/off the tool by pressing “On/Off” button A 1

- after approximately 5 minutes without button

actuation or angle change, the measuring tool

automatically switches off to preserve battery life

• Measuring angles 4

! protect the measuring tool against impact and

shock (dropping or banging the tool may lead to

faulty measurements)

! keep the contact edges of the measuring tool

clean (debris particles may lead to faulty

measurements)

- position base leg F 1 and fold-out leg G 1 against

the edges to be measured

- the reading in display C 1 corresponds with angle X

and remains unchanged until the legs are moved

! when directly projecting a measured angle onto a

workpiece, pay attention that base leg F and fold-

out leg G are not moved and that the retaining

(“HOLD”) mode is not switched on

• Retaining measured values

- the current reading can be retained in display C 1 by

pressing “HOLD” button B 1 (symbol K 1 will

appear in display)

- the reading remains unchanged (even when the legs

are moved) until “HOLD” button B is pressed again

! be aware that the retaining mode also

automatically switches off after 5 minutes of

inactivity

APPLICATION ADVICE

• Use “HOLD” button B 1 for deﬁ ning angles at hard-to-

reach and/or dark places where measuring and reading

cannot take place simultaneously

• Use bubble level D 1 or E 1 for deﬁ ning angles when

only one reference point is available 5

GUARANTEE / ENVIRONMENT

• Always keep the measuring tool free of dust, moisture

and direct sunlight

• Clean the tool with a dry, soft cloth (do not use cleaning

agents or solvents)

• Always store the tool indoors in its protective carton/

case

• Do not disassemble or modify the tool in any way

• This SKIL product is guaranteed in accordance with

statutory/country-speciﬁ c regulations; damage due to

normal wear and tear, overload or improper handling will

be excluded from the guarantee

• In case of a complaint, send the tool undismantled

together with proof of purchase to your dealer or the

nearest SKIL service-station (addresses are listed on

www.skileurope.com)

SKIL_IB0580db.indd 5SKIL_IB0580db.indd 5 30-05-2007 13:07:3330-05-2007 13:07:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0580 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info