Bedienungsanleitung Skil 0788 (Seite 6 von 120) (Alle Sprachen)

591142

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any



operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous

situation.

5) SERVICE

a) 

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS

GENERAL

 Be familiar with the controls and the proper use of the

tool

 The user is responsible for accidents or hazards

occurring to other people or their property

PERSONAL SAFETY

 This tool should not be used by people under the age

of 16 years

 Do not work materials containing asbestos

(asbestos is considered carcinogenic)

 Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

 Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

 Follow the dust-related national requirements for the

materials you want to work with

 Wear protective glasses and hearing protection

 Do not reach underneath the workpiece (the

proximity of the blade to your hand is hidden from your

sight)

 Keep hands away from between the tool housing

and blade clamp A ② (the blade clamp can pinch your

ngers)

 Keep hands away from cutting area and the blade;

keep your second hand on barrel grip B ② (if both

hands are holding the saw, they can not be cut by the

blade)

 Never hold piece being cut in your hands or across

your leg (it is important to support the work properly

to minimise body exposure, blade binding, or loss of

control)

 Use clamps or other equipment to secure and

support the workpiece (holding the workpiece in your

hand or against your body may lead to loss of control)

 Use protective gloves when removing the blade

from the tool (the saw blade may be hot after

prolonged use)

ELECTRICAL SAFETY

 Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to

a 220V supply)

 Inspect the cord periodically and have it replaced by a

qualied person, if damaged

 Only use an extension cord which is intended for

outdoor use and equipped with a watertight plug and

coupling-socket

 Inspect the extension cord periodically and replace it,

if damaged (inadequate extension cords can be

dangerous)

 Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

 When operating the tool use a residual current device

(RCD) with a triggering current of 30 mA maximum

 Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord (contact with a

"live" wire will also make exposed metal parts of the tool

"live" and shock the operator)

 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

 Do not run over, crush or pull the (extension) cord

 Protect the (extension) cord from heat, oil and sharp

edges

 Always switch o tool and disconnect plug from power

source if the power supply cord or the extension cord

is cut, damaged or entangled (do not touch the cord

before disconnecting the plug)

ACCESSORIES

 SKIL can assure awless functioning of the tool only

when original accessories are used

 Do not use a dull or damaged blade (bent blades can

break easily or cause kickback)

BEFORE USE

 Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

 Ensure that blade clamp A ② is tight before making

a cut (a loose clamp may cause the tool or blade to slip

with loss of control as a result)

 Only use the tool in daylight or with appropriate articial

lighting

DURING USE

 Do not get distracted and always concentrate on what

you are doing

Skil 0788 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info