Bedienungsanleitung Skil 1565 (Seite 8 von 112) (Alle Sprachen)

591210

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

 Chip outlet ⑧

- select desired chip outlet side (left or right) with switch

- connect vacuum cleaner to selected chip outlet G as

illustrated

! 

the chip outlet while knives are rotating

 Park rest H ⑨

- protects workpiece from damage when tool is put

aside

- will automatically fold backwards when planing

 Operating the tool

- adjust planing depth

- connect plug to power source (light J turns on

indicating that the tool is receiving power) ⑩

- place tool on workpiece

! ensure that only the front shoe rests on the

workpiece and that the knives do not touch it

- switch on the tool by rst pressing knob K ② (= safety

switch which cannot be locked) and then pulling

trigger L ②

! 

should run at full speed

! 

coloured grip area(s) ⑪

- hold the tool rmly with both hands and guide it

forward in a continuous stroke

- use the tool with its base-plate on the workpiece

- do not tilt the tool in order to avoid unwanted planing

marks

! 

from the workpiece

- switch o the tool by releasing trigger L

 Planing rabbets ⑫

- select required planing depth

- select rabbeting depth by using a rabbeting depth

adjuster (SKIL accessory 2610394022)

- place tool on workpiece

- start planing

- maximum rabbeting width 82 mm

- maximum rabbeting depth 18 mm

APPLICATION ADVICE

 When planing one may use a dust bag (SKIL accessory

2610394020)

 For chamfering edges use the V-grooves in the front

shoe ⑬

- select one of the 2 V-grooves M

- set knob D to position "0" for chamfering edges similar

to selected groove

- for larger grooves turn knob D to select the required

planing depth

! 

 When planing rabbets you will achieve better results by

using a parellel guide (SKIL accessory 2610394021) to

adjust rabbeting width ⑭

 For more tips see www.skil.com

MAINTENANCE / SERVICE

 This tool is not intended for professional use

 Always keep tool and cord clean (especially ventilation

slots N ②)

! 

 If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

 Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol ⑮ will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

 We declare under our sole responsibility that the product

described under “Technical data” is in conformity with

the following standards or standardization documents:

EN 60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2004/108/EC, 2006/42/EC,

2011/65/EU

 : SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

28.08.2014

SKIL Europe BV, 4825 BD Breda, NL

Marijn van der Hoofden

Operations & Engineering

Olaf Dijkgraaf

Approvals Manager

NOISE/VIBRATION

 Measured in accordance with EN 60745 the sound

pressure level of this tool is 90 dB(A) and the sound

power level 101 dB(A) (standard deviation: 3 dB), and

the vibration 2.8 m/s² (hand-arm method; uncertainty K

= 1.5 m/s²)

 The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 



keeping your hands warm, and organizing your

work patterns

Skil 1565 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info