Bedienungsanleitung Skil 1590 (Seite 11 von 116) (Alle Sprachen)

758610

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots M 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the tool will be excluded from the warranty

(for the SKIL warranty conditions see www.skil.com or

ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 88.0 dB(A) and the sound

power level 99.0 dB(A) (uncertainty K = 3 dB), and

the vibration < 2.5 m/s² (triax vector sum; uncertainty

K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Rabot 1590

INTRODUCTION

• Cet outil est conçu pour le rabotage des matériaux

en bois, tels que des poutres et des plances; il est

également approprié pour chanfreiner et pour faire des

feuillures

! do not attempt to adjust the knives with



manufacturing

• Adjusting planing depth 7

-turn knob D in “+”/”-” direction for increasing/decreasing

planing depth

-use indicator E as reference

-always select a shallow planing depth and repeat the

planing and adjusting process until the required depth

is reached

• Chip outlet 8

-select desired chip outlet side (left or right) with switch

-connect vacuum cleaner to selected chip outlet G as

illustrated

-one may also connect dust bag P to the selected chip

outlet as illustrated

! do not attempt to remove any obstructions from

the chip outlet while knives are rotating

• Park rest H 9

-protects workpiece from damage when tool is put aside

-will automatically fold backwards when planing

• Operating the tool

-adjust planing depth

-connect plug to power source

-place tool on workpiece

! ensure that only the front shoe rests on the

workpiece and that the knives do not touch it

-switch on the tool by rst pressing knob J 2 (= safety

switch which cannot be locked) and then pulling trigger

K 2

! before the knives reach the workpiece, the tool

should run at full speed

! 

coloured grip area(s) q

-hold the tool rmly with both hands and guide it forward

in a continuous stroke

-use the tool with its base-plate on the workpiece

-do not tilt the tool in order to avoid unwanted planing

marks

! 

the workpiece

-switch o the tool by releasing trigger K

• Planing rabbets w

-select required planing depth

-select rabbeting depth by using rabbeting depth

adjuster Q

-place tool on workpiece

-start planing

-maximum rabbeting width 82 mm

-maximum rabbeting depth 8 mm

APPLICATION ADVICE

• When planing one may use a dust bag

• For chamfering edges use the V-groove L in the front

shoe e

-set knob D to position “0” for chamfering edges similar

to selected groove

-for larger grooves turn knob D to select the required

planing depth

! 

• When planing rabbets you will achieve better results by

using a parallel guide to adjust rabbeting width r

• For more information see www.skil.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1590 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info