Bedienungsanleitung Skil 1609 AA (Seite 8 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

482564

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR MIXERS

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to

a 220V supply)

• Never use the tool without the protection frame

• Never use the tool in or near an explosive atmosphere

• Never mix combustible substances

• Never reach with your hand or any other object into the

mixing container during mixing

• Wear protective gloves 4, a dust mask 5, close-ﬁ tting

clothes and sturdy shoes

• The noise level when working can exceed 85 dB(A);

wear ear protection 6

• SKIL can assure ﬂ awless functioning of the tool only

when original accessories are used

• Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut off the cord of this

tool, it must be disposed of safely and not left

unattended

USE

• On/off 7

• Switch locking for continuous use 8

! be aware of the forces that occur as a result of

jamming; hold the tool firmly with both hands and

take a secure stance

• Speed control for smooth starting 9

• Maximum speed control 0

With wheel C the maximum speed can be adjusted from

low to high

- switch on the tool

- lock the switch

- turn wheel C to select maximum speed

• Protection frame !

- for protecting the tool

- for guiding the tool

- for putting aside the tool in a simple way

- mount protection frame D before using the tool for

the ﬁ rst time

! never use the tool without the protection frame

• Operating the tool

! ensure that the tool is switched off

- mount mixing paddle F onto spindle E as illustrated @

- connect plug to power source

- ensure the mixing container is securely positioned on

the ﬂ oor

- dip the mixing paddle into the blending substance

before switching on the tool, and then gradually

increase the blending speed by putting more

pressure on trigger A 2 (so that the substance will

not splash around and the tool will not be

overloaded)

! switch the tool off only when the mixing paddle is

in the mixing container

• Holding and guiding the tool #

! while working, always hold the tool at the grey-

coloured grip area(s)

! always hold the tool firmly with both hands

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots)

- always clean the mixer and functional parts after your

mixing work

- clean the tool with a dry, soft cloth (do not use

cleaning agents or solvents)

- clean ventilation slots G 2 regularly with a brush or

compressed air

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1609 AA Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info