Bedienungsanleitung Skil 1612 (Seite 8 von 92) (Alle Sprachen)

644821

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR MIXERS

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

• Never use the tool without the protection frame

• Never use the tool in or near an explosive atmosphere

• Never mix combustible substances

• Never reach with your hand or any other object into the

mixing container during mixing

• Wear protective gloves 4, a dust mask 5, close-tting

clothes and sturdy shoes

• The noise level when working can exceed 85 dB(A);

wear ear protection 6

• SKIL can assure awless functioning of the tool only

when the correct accessories are used which can be

obtained from your SKIL dealer

• Alwaysdisconnectplugfrompowersourcebefore

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o 7

• Switch locking for continuous use 8

! be aware of the forces that occur as a result of

jamming; hold the tool firmly with both hands and

take a secure stance

• Speed control for smooth starting 9

• Maximum speed control 0

With wheel C the maximum speed can be adjusted from

low to high

- switch on the tool

- lock the switch

- turn wheel C to select maximum speed

• Mechanical gear selection ! (1612)

- set selector D to desired speed

! actuate the gear selector only when tool is

switched off

1 = LOW SPEED

- high torque

- for mixing high-density substances

2 = HIGH SPEED

- lower torque

- for mixing liquid substances

• Protection frame @

- for protecting the tool

- for guiding the tool

- for putting aside the tool in a simple way

- mount protection frame E before using the tool for the

rst time

! never use the tool without the protection frame

• Operating the tool

! ensure that the tool is switched off

- mount mixing paddle G onto spindle F as illustrated #

- connect plug to power source

- ensure the mixing container is securely positioned on

the oor

- dip the mixing paddle into the blending substance

before switching on the tool, and then gradually

increase the blending speed by putting more pressure

on trigger A 2 (so that the substance will not splash

around and the tool will not be overloaded)

! switch the tool off only when the mixing paddle is

in the mixing container

• Holding and guiding the tool $

! while working, always hold the tool at the

grey-coloured grip area(s)

! always hold the tool firmly with both hands

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots)

- always clean the mixer and functional parts after your

mixing work

- clean the tool with a dry, soft cloth (do not use cleaning

agents or solvents)

- clean ventilation slots H 2 regularly with a brush or

compressed air

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in manufacturing

and testing procedures, repair should be carried out by an

after-sales service centre for SKIL power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skilmasters.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1612 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info