Bedienungsanleitung Skil 1841 (Seite 10 von 128) (Alle Sprachen)

701687

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Use clamps or another practical way to secure and

support the workpiece to a stable platform (holding

the workpiece by hand or against your body leaves it

unstable and may lead to loss of control)

• Do not clamp the tool in a vice

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Be sure tool is switched o when plugging in

DURING USE

• Hold the power tool by insulated gripping surfaces,

because the cutter may contact its own cord (cutting

a “live” wire may make exposed metal parts of the power

tool “live”and could give the operator an electric shock)

• Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

• Never use the tool when cord or base-plate Q

(=protective guard) is damaged; have it replaced by a

qualied person

• Keep hands and ngers away from router bit when tool is

switched on

• Never exceed maximum cutting depth of router bit while

cutting

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• In case the router bit is blocked, resulting in jerking forces

on the tool, immediately switch o the tool

• In case of current interruption or when the plug is

accidentally pulled out, immediately switch o the tool in

order to prevent uncontrolled restarting

• Do not apply so much pressure on the tool that it comes

to a standstill

AFTER USE

• After nishing the work, loosen lever H

, guide the tool

back into the upper starting position, and switch o the

tool

EXPLANATION OF SYMBOLS ON TOOL

Read the instruction manual before use

Double insulation (no earth wire required)

Do not dispose of the tool together with household waste

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• Mounting/removing router bits

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn

 Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage



power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) 

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR ROUTERS

GENERAL

• This tool should not be used by people under the age of

16 years

• Always disconnect plug from power source before

making any adjustment or changing any accessory

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

• Do not use damaged or deformed router bits

• Only use sharp router bits

• Protect accessories from impact, shock and grease

• Only use high speed steel (HSS) or carbide-tipped (CT)

router bits with this tool

BEFORE USE

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

Skil 1841 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info