Bedienungsanleitung Skil 1960 (Seite 7 von 120) (Alle Sprachen)

758620

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

for improved visualisation of the

laser beam, but they do not protect

against laser radiation)

-do not use the laser viewing

glasses as sun glasses or in

 (the laser viewing glasses do

not aord complete UV protection

and reduce colour perception)

• Working with the tripod (not standard

included)

-tripod K 1 oers a stable, height-

adjustable measuring support

-place the measuring tool via tripod

mount G onto the 1/4” male thread

of the tripod and screw the locking

screw of the tripod tight

MAINTENANCE / SERVICE

• This tool is not intended for

professional use

• Protect the measuring tool against

moisture and direct sun light

• Do not subject the measuring

tool to extreme temperatures or

variations in temperature (the

accuracy of the measuring tool can

be impaired)

-as an example, do not leave it in

vehicles for long time

-allow the measuring tool to adjust

to the ambient temperature before

putting it into operation

• Avoid heavy impact to or falling

down of the measuring tool

-damage to the measuring tool can

impair its accuracy

-after heavy impact or shock,

compare the laser lines with

a known horizontal or vertical

reference line

• Push switch F 1 into locking

position 6 when transporting

the measuring tool (this locks the

levelling unit, which can be damaged

in case of intense movement)

• Keep the measuring tool clean at all

times

• Do not immerse the measuring tool in

water or other uids

• Wipe o debris using a moist and

soft cloth

• Do not use any cleaning agents or

solvents

-slide switch F to position 6a

-if the automatic levelling function

is not possible, e.g. because the

surface on which the measuring tool

stands deviates by more than 4°

from the horizontal plane, the laser

lines ash and indicator E turns red

-if this is the case, set up the

measuring tool in a level position

and wait for the self-levelling to

take place

-as soon as the measuring tool is

once again within the self-levelling

range of ±4°, the laser lines light

up continuously and indicator E

turns o

-when not within the self-levelling

range of ±4°, working with automatic

levelling is not possible, because

it cannot be assured that the laser

lines run at a right angle to each

other

-in case of ground vibrations or

position changes during operation,

the measuring tool is automatically

levelled in again

-to avoid errors, check the position of

the horizontal and vertical laser line

with regard to the reference points

upon re-levelling

• Working without automatic levelling

-slide switch F to position 6b

-push laser button C to turn on the

laser beam

-indicator E turns red continuously

in this mode

-when automatic levelling is switched

o, you can hold the measuring tool

freely in your hand or place it on an

inclined surface

APPLICATION ADVICE

• Always use the centre of the laser

line for marking (the width of the

laser line changes with the distance)

• Laser viewing glasses 1 (not

standard included)

-laser viewing glasses J 1 lter out

the ambient light

-this makes the light of the laser

appear brighter for the eyes

-do not use the laser viewing

glasses as safety goggles (the

laser viewing glasses are used

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1960 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info