Bedienungsanleitung Skil 2536 (Seite 5 von 164) (Alle Sprachen)

591182

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite



Cordless screwdriver 2536

INTRODUCTION

• This tool with left/right rotation is

intended for screwdriving and

pre-drilling in wood

• Read and save this instruction manual

TECHNICAL SPECIFICATIONS 1

Max. torque for hard screwdriving

application according to ISO 5393: 7 Nm

TOOL ELEMENTS 2

A On/o switch

B Charger

C Charger contact

D Charging light

E Switch for changing direction of

rotation

F Magnetic bitholder

G Spot light

H Unlocking knob

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety

warnings and all instructions. Failure

to follow the warnings and instructions

may result in electric shock, fire and/or

serious injury. Save all warnings and

instructions for future reference. The

term “power tool” in the warnings refers to

your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite

accidents.

b) Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

c) Keep children and bystanders

away while operating a power tool.

Distractions can cause you to lose

control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the

outlet. Never modify the plug in

any way. Do not use any adapter

plugs with earthed (grounded)

power tools. Unmodied plugs and

matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or

grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering a

power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged or

entangled cords increase the risk of

electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use an

earth leakage circuit breaker. Use

of an earth leakage circuit breaker

reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool. Do

not use a power tool while you are

tired or under the influence of

drugs, alcohol or medication. A

moment of inattention while operating

power tools may result in serious

personal injury.

b) Use personal protective

equipment. Always wear eye

protection. Protective equipment

such as dust mask, non-skid safety

shoes, hard hat, or hearing protection

used for appropriate conditions will

reduce personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the

off-position before connecting to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 2536 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info