Bedienungsanleitung Skil 2830 (Seite 11 von 140) (Alle Sprachen)

797778

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

USE

• Combined switch for on/o and speed control A 2

Control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

• Charging battery 9

!remove battery from tool

-connect charger to power source as illustrated 9a

-green light B will turn on indicating that the charger is

ready for operation 9a

-insert battery into charger as illustrated 9b

-red light C will turn on indicating that the battery is

being charged 9c

-after approximately 3 hours (2610Z08495) / 5 hours

(2610Z08496) the battery is fully charged and green

light B turns on 9d

!remove battery from charger after charging period

has ended thereby lengthening the service life of

the battery

IMPORTANT:

-if red light C does not turn on after inserting a battery,

this may mean that the battery is too cold or too hot

(charger only charges batteries when its temperature is

between 0°C and 45°C)

-the lithium-ion battery can be charged at any time

(interrupting the charging procedure does not damage

the battery)

-the lithium-ion battery does not have to be empty

before charging (no "memory-eect" as with nickel-

cadmium batteries)

-while charging, the charger and the battery may

become warm to touch; this is normal and does not

indicate a problem

-ensure that the outside surface of the battery is clean

and dry before inserting into charger

-do not remove battery from tool while it is running

-if you anticipate long periods of non-use for the tool, it

is best to unplug the charger from its power source

-when the lithium-ion battery is empty, the tool is

switched o automatically

-a signicantly reduced working period after charging

indicates that the battery is worn out and should be

replaced

• Changing direction of rotation q

-when not properly set in left/right position, switch A 2

cannot be activated

!change direction of rotation only when tool is at a

complete standstill

• Changing bits w

!do not use bits with a damaged shank

• Torque control (VariTorque) e

-output torque will increase as clutch ring D is rotated

from 1 to 19; position E will lock up the clutch to permit

drilling or driving heavy duty work

-when turning in a screw, rst try VariTorque position 1

and increase until the desired depth has been reached

• Mechanical gear selection r (2832)

-set selector G to desired speed

!actuate the gear selector while tool is running

slowly

LOW

-low speed

-high torque

above and by persons who

have physical, sensory or

mental limitations or a lack

of experience or knowledge

if a person responsible for

their safety supervises them

or has instructed them in the

safe operation of the charger

and they understand the

associated dangers (otherwise,

there is a danger of operating

errors and injuries)

• Supervise children (this will

ensure that children do not play

with the charger)

• Cleaning and user

maintenance of the battery

charger shall not be made by

children without supervision

• Only use SKIL charger 2610Z08495 or 2610Z08496 and

SKIL battery pack 2610Z08494 with this tool

• Charge battery only with the charger that is supplied with

the tool

• Do not touch the contacts in the charger

• Do not expose tool/charger/battery to rain

• Do not charge battery in damp or wet environments

• Do not use charger when damaged; take it to one of the

ocially registered SKIL Service Stations for a safety

check

• Do not use charger when cord or plug is damaged; cord

or plug should be replaced immediately at one of the

ocially registered SKIL Service Stations

• Do not use battery when damaged; it should be replaced

immediately

• Do not disassemble charger or battery

• Do not attempt to recharge non-rechargeable batteries

with the charger

• Permitted ambient temperature (tool/charger/battery):

-when charging 0...+45°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/CHARGER/

BATTERY

3 Read the instruction manual before use

4 Only use the charger indoors

5 Double insulation (no earth wire required)

6 Batteries may explode when disposed of in re, so do not

burn battery for any reason

7 Store tool/charger/battery in locations where temperature

will not exceed 50°C

8 Do not dispose of electric tools and batteries together

with household waste material

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 2830 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info