Bedienungsanleitung Skil 3123 (Seite 5 von 80) (Alle Sprachen)

758627

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

charged at any time (interrupting

the charging procedure does not

damage the battery)

-the lithium-ion battery does not

have to be empty before charging

(no “memory-eect" as with nickel-

cadmium batteries)

-while charging, the charger and the

battery may become warm to touch;

this is normal and does not indicate

a problem

-ensure that the outside surface of

the battery is clean and dry before

inserting into charger

-if you anticipate long periods of non-

use for the tool, it is best to unplug

the charger from its power source

-a signicantly reduced working

period after charging indicates that

the battery is worn out and should

be replaced

MAINTENANCE / SERVICE

• Keep charger clean

-clean charging contacts in charger

with alcohol or contact cleaner

! unplug charger from power

source before cleaning

• If the charger should fail despite the

care taken in manufacturing and

testing procedures, repair should be

carried out by an after-sales service

centre for SKIL power tools

-send the charger undismantled

together with proof of purchase to

your dealer or the nearest SKIL

service station (addresses as well

as the service diagram of the tool

are listed on www.skil.com)

• Be aware that damage due to overload

or improper handling of the product

will be excluded from the warranty

(for the SKIL warranty conditions see

www.skil.com or ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools,

accessories and packaging

together with household waste

material (only for EU countries)

-in observance of European Directive

2012/19/EC on waste of electric

and electronic equipment and its

• Do not disassemble charger

• Do not attempt to recharge non-

rechargeable batteries with the

charger

• Permitted ambient temperature

(charger):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON

CHARGER

3 Read the instruction manual before

use

4 Only use the charger indoors

5 Double insulation (no earth wire

required)

6 Do not dispose of electric tools and

batteries together with household

waste material

7 Time lag fuse (3122/3124)

8 Time lag fuse (3123)

USE

• Charging battery 9

-remove battery from tool

-connect charger to power source as

illustrated 9a

-both lights A and B turn on for 1

second and then turn o again 9b

-insert battery into charger as

illustrated 9c

-green light A starts ashing

indicating that the battery is being

charged 9b

-when the battery is fully charged

and green light A turns on 9d

-remove battery from charger as

illustrated 9d

! remove battery from charger

after charging period has ended

thereby lengthening the service

life of the battery

IMPORTANT:

-if red light B starts ashing after

inserting a battery, this means that

the battery is damaged and should

be replaced 9b

-if red light B turns on after inserting

a battery, this may mean that

the battery is too cold or too hot

(charger only charges batteries

when its temperature is between

4°C and 40°C) 9b

-the lithium-ion battery can be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 3123 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info