Bedienungsanleitung Skil 3210 (Seite 9 von 105) (Alle Sprachen)

758023

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool clean (especially ventilation slots E 2)

! remove battery from tool before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the tool will be excluded from the warranty

(for the SKIL warranty conditions see www.skil.com or

ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools, batteries,

accessories and packaging together with household

waste material (only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 6 will remind you of this when the need for

disposing occurs

! prior to disposal protect battery terminals with

heavy tape to prevent short-circuit

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 94.5 dB(A) and the sound

power level 105.5 dB(A) (uncertainty K = 3 dB), and

the vibration 14.5 m/s² (triax vector sum; uncertainty

K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Visseuse à chocs

 3210

INTRODUCTION

• Cet outil est conçu pour serrer et déserrer des vis et des

boulons

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 Do not dispose of electric tools and batteries together

with household waste material

USE

• Combined switch for on/o and speed control A 2

-control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger At

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• Attaching belt clip 7

-attach the belt clip G to the drill with the supplied screw.

• Battery level indicator 8

-press the battery level indicator button H to show the

current battery level.

• Changing direction of rotation 9

-when not properly set in left/right position, switch A 2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Changing bits q

-to remove a bit, pull the locking sleeve C forward 2

-pull the locking sleeve C forward, insert the bit to the

stop into the bit holder and release the locking sleeve C

to lock the bit. qa qb qc

! only use bits with ball catch, other bits can be

used with a universal bit holder with ball catch qb

! do not use bits with a damaged shank

• Battery protection

Switches o the tool or prevents the tool from being

switched on, when

-the load is too high

-the battery temperature is not within the allowable

operating temperature range of -20 to +50°C

-the lithium-ion battery is nearly empty (to protect

against deep discharge)

! 



damaged

• LED-light F w

-LED-light F automatically lights on when activating

switch A w

• Holding and guiding the tool e

! while working, always hold the tool at the grey-

coloured grip area(s)

-keep ventilation slots E 2 uncovered

-do not apply too much pressure on the tool; let the tool

do the work for you

APPLICATION ADVICE

• Use the appropriate bits y

• When turning in a screw at/near the cross cut end or an

edge of wood, pre-drill a hole in order to avoid cracking

of the wood

• For an optimal use of the tool a steady pressure on the

screw is required, especially while removing

• When screwdriving in hard wood one should pre-drill a

hole

• For more information see www.skil.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 3210 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info