Bedienungsanleitung Skil 3480 (Seite 11 von 140) (Alle Sprachen)

758590

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

-switch on the tool by pulling trigger B

-control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

-switch o by releasing trigger B

• Locking knob A can be activated 9

-if activated, the on/o switch is blocked and the

machine is secured against being switched on

unintentionally

• Mounting saw blade w

! remove battery from tool before making any

adjustments or changing accessories

-turn blade clamp C in same direction as arrow D on tool

and hold it in that position

-insert blade (with teeth facing down or up) to full depth

-release blade clamp C

-push in and pull out blade to check whether it is locked

correctly

• Removing saw blade w

! remove battery from tool before making any

adjustments or changing accessories

-turn blade clamp C in same direction as arrow D on tool

and hold it in that position

-pull out blade

-release blade clamp C

• Orbital action for fast cutting e

-for activating the orbital action of the saw blade use

switch N as illustrated

! do not activate the orbital action when cutting

metal

• Operating the tool

! securely clamp the workpiece

-mark the cutting line on the workpiece

-mount battery on tool

-hold the tool with one hand on handle E and the other

on the insulated barrel grip F

-switch on the tool

-guide the tool along the marked cutting line

-keep footplate G rmly against the workpiece to

minimize counter-force and vibration

• Holding and guiding the tool

! while working, always hold the tool at the grey-

coloured grip area(s) r

-keep ventilation slots H uncovered

-do not apply too much pressure on the tool; let the tool

do the work for you

! ensure that the saw blade extends beyond the

work throughout the stroke t

• Adjusting eective sawing depth y

! remove battery from tool before making any

adjustments or changing accessories

-use hex key K for loosening and fastening both

fastening bolts J

-slide footplate G forward/backwards in order to enlarge/

reduce the eective sawing depth

APPLICATION ADVICE

• Plunge cutting u

Plunge cuts can be made in wood and other soft

materials without pre-drilling a hole

-use a thick saw blade

! remove battery from tool before making any

adjustments or changing accessories

-mount the blade with the teeth facing upward

-mark desired cutting line on the workpiece

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

-SKIL battery: BR1*31****

-SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 Do not dispose of electric tools and batteries together

with household waste material

USE

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• Battery level indicator 7

-press the battery level indicator button L to show the

current battery level 7a

! when the lowest level of the battery indicator

7b, the

battery is empty

! 

after pressing button L 7c, the battery is not

within the allowable operating temperature range

• LED light 8

LED-light automatically lights on when activating the on/

o switch

! 

protection is activated (see below)

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

-the load is too high --> remove load and restart

-the battery temperature is not within the allowable

operating temperature range of -20 to +50°C --> 2

levels of the battery level indicator start ashing when

pressing button L 7c; wait until battery has returned

within the allowable operating temperature range

-the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level 7b is shown by the battery level indicator

when pressing button L; charge battery

! 



damaged

• Combined switch for on/o and speed control with

locking knob 9 q

-rst unlock by pressing knob A

Skil 3480 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info