Bedienungsanleitung Skil 3550 (Seite 12 von 188) (Alle Sprachen)

758586

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

ADDITIONAL SAFETY WARNINGS

GENERAL

• This tool should not be used by people under the age of

16 years

• This tool is not suitable for wet cutting

•  (asbestos

is considered carcinogenic)

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); 



• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust





• Follow the dust-related national requirements for the

materials you want to work with

• Do not use this saw in combination with a saw table

• Remove battery from tool before making any adjustments

or changing accessories

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only saw blades that correspond with the

characteristic data given in these operation instructions

and that are tested and marked in accordance with EN

847-1

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

• Use only saw blades with a minimum diameter of 165

mm, a maximum diameter of 165 mm and a spindle hole

of 16 mm

• Never use saw blades made of high speed steel (HSS)

• Never use grinding/cutting discs with this tool

BEFORE USE

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Remove all obstacles on top of as well as underneath the

cutting path before you start cutting

•  (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• 



(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

DURING USE

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Never use the tool without the original protection guard

system

• Do not attempt to cut extremely small workpieces

• Do not work overhead with the tool

• In case of jamming or electrical or mechanical

malfunction, immediately switch o the tool and

disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

• Kickback is the result of power tool misuse and/or

incorrect operating procedures or conditions and can be

avoided by taking proper precautions as given below.

a) 





 Kickback could cause the

saw to jump backwards, but kickback forces can be

controlled by the operator, if proper precautions are

taken.

b) 





a complete stop. Never attempt to remove the saw



 Investigate

and take corrective actions to eliminate the cause of

blade binding. Avoid cutting nails or screws.

c) 



not engaged into the material. If saw blade is binding,

it may walk up or kickback from the workpiece as the saw

is restarted.

d) 

 Large panels tend to sag under

their own weight. Supports must be placed under the

panel on both sides, near the line of cut and near the

edge of the panel.

e)  Unsharpened

or improperly set blades produce narrow kerf causing

excessive friction, blade binding and kickback.

f) 

 If blade

adjustment shifts while cutting, it may cause binding and

kickback.

g) Use extra caution when sawing into existing walls or

 The protruding blade may cut objects

that can cause kickback.

3) LOWER GUARD FUNCTION

a) 

use. Do not operate the saw if lower guard does not



the lower guard into the open position. If the saw is

accidentally dropped, lower guard may be bent. Raise

the lower guard with the retracting handle and make sure

it moves freely and does not touch the blade or any other

part, in all angles and depths of cut.

b) 



 Lower guard

may operate sluggishly due to damaged parts, gummy

deposits, or a build-up of debris.

c) 

special cuts such as plunge cuts and compound





 For all other sawing, the lower guard

should operate automatically.

d) 



 An unprotected, coasting blade will cause the

saw to walk backwards, cutting whatever is in its path. Be

aware of the time it takes for the blade to stop after switch

is released.

Skil 3550 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info