758598
12
Zoom out
Zoom in
Vorherige Seite
1/140
Nächste Seite
12
operating temperature range of -20 to +50°C --> 2

pressing button M 8c; wait until battery has returned
within the allowable operating temperature range
-the battery is nearly empty (to protect against
deep discharge)
battery level 8b is shown by the battery level indicator
when pressing button M; charge battery
! 

damaged
Changing accessories q
! remove battery from tool
-remove/mount the required accessory as illustrated
-ensure that the openings of the accessory engage into

-mount the accessory with the depressed centre
pointing downwards
-check the tight seating of the accessory (incorrect
or not securely fastened accessories can come loose

Dust suction w
! remove battery from tool
-use vacuum cleaner adapter J only when working with
sanding pad E
-mount vacuum cleaner adapter J as illustrated
-connect vacuum cleaner
! do not use dust extraction device/vacuum cleaner
when sanding metal
-clean vacuum cleaner adapter J regularly for optimal
dust pick-up performance
Mounting of sanding sheet e
-tap the dust out of the VELCRO material on sanding
pad E before mounting the sanding sheet
-mount VELCRO sanding sheet H as illustrated
! the dust suction requires the use of perforated
sanding sheets
! perforation in sanding sheet should correspond
with perforation in sanding foot
! replace worn sanding sheets in time
! always use the tool with the total VELCRO surface
covered with sanding paper

-2 in “I”/”O”
position
! before the accessory reaches the workpiece, the
tool should run at full speed
! 
the workpiece
Adjusting working speed r
-with wheel D the required oscillating frequency can


-the optimal working speed depends on the material
and can be determined with practical trials
Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s) t
-keep ventilation slots K uncovered
-do not apply too much pressure on the tool (excessive
pressure will cause excessive heat and may shorten

not
standard includedy
Do not use a saw blade which is cracked, deformed or
dull
WHEN SANDING
Use the tool only for dry sanding (penetration of water

Do not touch the moving sanding sheet
Do not continue to use worn, torn or heavily clogged
sanding sheets
When sanding metal, sparks are generated; do not use
vacuum cleaner and keep other persons and combustible
material from work area
BATTERIES
The battery supplied is partially charged (to ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the

Only use the following batteries and chargers with
this tool
-
-
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain

-when charging 4...40°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 This tool accepts most commonly available multi-tool
accessories, including existing OIS and Starlock basic
accessories
4 Read the instruction manual before use
5
burn battery for any reason
6 Store tool/charger/battery in locations where temperature
will not exceed 50°C
7 Do not dispose of electric tools and batteries together
with household waste material
USE
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery 2
Battery level indicator 8
-press the battery level indicator button M to show the
current battery level 8a
! when the lowest level of the battery indicator
8b, the
battery is empty
! 
after pressing button M 8c, the battery is not
within the allowable operating temperature range
LED-light L 9
LED-light automatically lights on when activating the on/

! 
protection is activated (see below)
Battery protection

being switched on, when
-the load is too high --> remove load and restart
-the battery temperature is not within the allowable
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Skil 3650 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info