Bedienungsanleitung Skil 4531 (Seite 13 von 116) (Alle Sprachen)

758579

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the tool will be excluded from the warranty

(for the SKIL warranty conditions see www.skil.com or

ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools, batteries,

accessories and packaging together with household

waste material (only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 82.0 dB(A) and the sound

power level 93.0 dB(A) (uncertainty K = 5 dB), and the

vibration ✱ (triax vector sum; uncertainty K = 1.5 m/s²)

✱cutting board 5.5 m/s²

✱cutting sheet metal 5.6 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Scie sauteuse 4531

INTRODUCTION

• Cet outil est conçu pour eectuer des découpes et

coupes dans le bois, les matières plastiques, le métal, les

plaques en céramique et le caoutchouc, et est approprié

pour des coupes droites et curvilignes avec des angles

d’onglet jusqu’à 45°

• Cet outil n’est pas conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

• LED-light J r

-LED-light J automatically lights on when activating

switch A

• Switch for dust blowing D t

• Selecting sawing mode y

Use lever F 2 for adjusting the orbital action from

accurate cutting (= 0) to fast cutting (= 3)

-1 setting (“0”) for accurate cutting in all materials,

straight + curved

-3 settings for fast cutting in dierent materials, straight

cuts only

1 = metal

2 = plastic

3 = hard wood

! always select “0” when sawing splinter-sensitive

material

• Operating the tool

-before switching on the tool, ensure that front end of

footplate rests at on the workpiece

-hold tool rmly with both hands, so you will have full

control of the tool at all times

! while working, always hold the tool at the grey-

coloured grip area(s) u

-ensure that complete surface of footplate rests rmly on

the workpiece

! ensure that the blade has come to a complete

standstill, before you lift the tool from the

workpiece

-keep ventilation slots G 2 uncovered

APPLICATION ADVICE

• Use the appropriate saw blades i

! tool accepts most commonly available T-shank

and U-shank blades

• When cutting metals, lubricate saw blade regularly with

oil

• For an accurate straight cut, guide tool with footplate

along the edge of a straight piece of wood o

• Pre-drill a hole before making cut-outs p

• Splinter-free cutting

-cover cutting-line with several layers of wide tape

before cutting

-always face the good side of the workpiece down

• For more information see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots G 2)

! disconnect the plug before cleaning

• If lever M loosens during use, set the tightness of lever

M a

-place lever M in middle position

-loosen lock screw L with PH2 screw driver counter

clockwise

-tighten set screw K nger tight with Allen key 4mm

counter clockwise

! set screw K uses left hand thread

-tighten lock screw L with PH2 screw driver clockwise

-tighten lever M

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 4531 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info