Bedienungsanleitung Skil 4920 (Seite 9 von 112) (Alle Sprachen)

797815

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the tool will be excluded from the warranty

(for the SKIL warranty conditions see www.skil.com or

ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

NOISE/VIBRATION

• Measured in accordance with EN62841 the sound

pressure level of this tool is 90 dB(A) and the sound

power level 101 dB(A) (uncertainty K = 3 dB), and the

vibrationÞ(triax vector sum; uncertainty K = 1.5 m/s2)

✱cutting board 25.5 m/s2

✱cutting wooden beams 20.7 m/s2

• The vibration emission level has been measured in

accordance with a standardized test given in EN62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protectyourselfagainsttheeectsofvibrationby

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Scie sabre 4920

INTRODUCTION

• Cet outil est conçu pour la découpe du bois, du plastique,

du métal et des matériaux de construction, ainsi que pour

l’élagage et l’ébranchage ; il convient pour les coupes

droites et curvilignes

• Cet outil n’est pas conçu pour un usage professionnel

• Lorsque des pièces manquent ou sont endommagées,

veuillez contacter votre distributeur

• Lisez attentivement ce manuel d’instruction avant

d’utiliser l’appareil et conservez-le pour pouvoir

vous y référer ultérieurement 3

-release blade clamp B

-push in and pull out blade to check whether it is locked

correctly

• Removing saw blade 8

-turn blade clamp B in same direction as arrow C on tool

and hold it in that position.

-pull out blade

-release blade clamp B

• Operating the tool

! securely clamp the workpiece

-mark the cutting line on the workpiece

-connect plug to power source

-hold the tool with one hand on handle D 2 and the

other on the insulated barrel grip E 2

-switch on the tool

-guide the tool along the marked cutting line

-keep footplate F 2 rmly against the workpiece to

minimize counter-force and vibration

• Holding and guiding the tool

! while working, always hold the tool at the grey-

coloured grip area(s) 9

-keep ventilation slot J 2 uncovered

-do not apply too much pressure on the tool; let the tool

do the work for you

! ensure that the saw blade extends beyond the

work throughout the stroke q

• Adjusting eective sawing depth w

-use both fastening bolts G for sliding footplate F

forward/backwards in order to enlarge/reduce the

eective sawing depth

APPLICATION ADVICE

• Plunge cutting e

Plunge cuts can be made in wood and other soft

materials without pre-drilling a hole

-use a thick saw blade

-mount the blade with the teeth facing upward

-mark desired cutting line on the workpiece

-tilt the tool so that the blade does not touch the

workpiece

-switch on the tool and carefully engage the moving saw

blade into the workpiece

-after the blade has penetrated through the workpiece

continue sawing along the marked cutting line

! do not make plunge cuts in metal materials

• Use the appropriate saw blades r

• When cutting metals, lubricate saw blade regularly with

oil

• Splinter-free cutting

-cover cutting-line with several layers of wide tape

before cutting

-always face the good side of the workpiece down

• For more information see www.skil.com

MAINTENANCE/SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots J 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 4920 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info