Bedienungsanleitung Skil 4960 (Seite 9 von 120) (Alle Sprachen)

644809

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

• Adjustable footplate 0

- footplate F tilts in order to keep as much of its surface

in contact with the workpiece

- adjust footplate by holding the saw rmly and turning

footplate to desired position

• Blade storage compartment !

- ensure that storage compartment G is closed to

prevent blades from falling out

• Operating the tool

! securely clamp the workpiece

- mark the cutting line on the workpiece

- select desired sawing speed with wheel C 2

- connect plug to power source (light B turns on

indicating that the tool is receiving power) @

- hold the tool with one hand on handle H 2 and the

other on the insulated barrel grip J 2

- switch on the tool

! the tool should run at full speed before the blade

enters the workpiece

- guide the tool along the marked cutting line

- keep footplate F 2 rmly against the workpiece to

minimize counter-force and vibration

• Holding and guiding the tool

! while working, always hold the tool at the

grey-coloured grip area(s) #

- keep ventilation slots K 2 uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

! ensure that the saw blade extends beyond the

work throughout the stroke $

• Adjusting eective stroke length %

- use both adjustment screws L for sliding footplate F

forward/backwards in order to enlarge/reduce the

eective stroke length

! do not attempt to adjust the effective stroke

length with screw M which is pre-set at

manufacturing

APPLICATION ADVICE

• Plunge cutting ^

Plunge cuts can be made in wood and other soft

materials without pre-drilling a hole

- use a thick saw blade

- mount the blade with the teeth facing upward

- hold the saw upside down as illustrated

- mark desired cutting line on the workpiece

- select position 1, 2 or 3 with wheel C

- tilt the tool so that the blade does not touch the workpiece

- switch on the tool and carefully engage the moving

saw blade into the workpiece

- after the blade has penetrated through the workpiece

continue sawing along the marked cutting line

! do not make plunge cuts in metal materials

• When cutting metals, lubricate saw blade regularly with oil

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially ventilation

slots K 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skilmasters.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol & will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this product

is in conformity with the following standards or

standardized documents: EN 60745, EN 61000, EN

55014, in accordance with the provisions of the directives

2004/108/EC, 2006/42/EC, 2011/65/EU

• Technical file at: SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

¹ÊÁÂÆÎ¹Æ¼½ÊÇÇ¾¼½Æ

È½Ê¹ÌÁÇÆËŵÆ¿ÁÆ½½ÊÁÆ¿

ÍÊÇÈ½Ɠˁ˅ʿ˂Ê½¼¹Ɠ

Ä¹¾ÁÂÃ¿Ê¹¹¾

ÈÈÊÇÎ¹Ä¹Æ¹¿½Ê

04.12.2013

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 89 dB(A) and the sound

power level 100 dB(A) (standard deviation: 3 dB), and the

vibration ✱ (hand-arm method; uncertainty K = 1.5 m/s²)

✱ when cutting chipboard 10.1 m/s²

✱ when cutting wooden beams 9.2 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 4960 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info