Bedienungsanleitung Skil 4961 (Seite 8 von 112) (Alle Sprachen)

758588

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

PERSONAL SAFETY

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• This tool should not be used by people under the age of

16 years

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Keep hands away from cutting area and the blade;

keep your second hand on barrel grip E 2 (if both

hands are holding the saw, they can not be cut by the

blade)

• Do not reach underneath the workpiece (the proximity

of the blade to your hand is hidden from your sight)

• Never hold piece being cut in your hands or across

your leg (it is important to support the work properly

to minimise body exposure, blade binding, or loss of

control)

• Do not use a dull or damaged blade (bent blades can

break easily or cause kickback)

• Use protective gloves when removing the blade

from the tool (the saw blade may be hot after prolonged

use)

• Wear protective glasses and hearing protection

EXPLANATION OF SYMBOLS ON TOOL

3 Read the instruction manual before use

4 Double insulation (no earth wire required)

5 Do not dispose of the tool together with household waste

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

•If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• Combined switch for on/o and speed control 6 7

-switch on/o the tool by pulling/releasing trigger A

-control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

• Mounting saw blade 8

! disconnect the plug

-turn blade clamp B in same direction as arrow C on tool

and hold it in that position

-insert blade (with teeth facing down or up) to full depth

-release blade clamp B

-push in and pull out blade to check whether it is locked

correctly

• Removing saw blade 8

-turn blade clamp B in same direction as arrow C on tool

and hold it in that position

-pull out blade

-release blade clamp B

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage



power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) 

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS

• Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord (cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock)

• Use clamps or another practical way to secure and

support the workpiece to a stable platform (holding

the workpiece by hand or against your body leaves it

unstable and may lead to loss of control)

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

ELECTRICAL SAFETY

• Never use the tool when the cord is damaged; it must be

replaced by a specially prepared cord available through

the service organization.

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

Skil 4961 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info