Bedienungsanleitung Skil 5740 aa (Seite 11 von 164) (Alle Sprachen)

383479

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

d) Always observe that the lower guard is covering the

blade before placing saw down on bench or floor.

An unprotected, coasting blade will cause the saw to

walk backwards, cutting whatever is in its path. Be aware

of the time it takes for the blade to stop after switch is

released.

ADDITIONAL SAFETY WARNINGS

GENERAL

• This tool should not be used by people under the age of

16 years

• This tool is not suitable for wet cutting

• Always disconnect plug from power source before

making any adjustment or changing any accessory

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic (such

as oak and beech dust) especially in conjunction with

additives for wood conditioning; wear a dust mask and

work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Only use a saw table provided with a switch that prevents

restarting of the motor after interruption of voltage

• Only use a saw table provided with a kerf guide

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only saw blades that correspond with the

characteristic data given in these operation instructions

and that are tested and marked in accordance with EN

847-1

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

• Use only saw blades with a minimum diameter of

122 mm, a maximum diameter of 130 mm and a

spindle hole of 16 mm

• Only use saw blades with a hole diameter which ts the

tool spindle without play

• Be aware of the following when using a saw blade with

reducer ring included (SKIL accessory 2610399267)

! only use the reducer ring mounted in the saw

blade

- before mounting the saw blade always ensure that the

reducer ring is rmly xed

- the use of other loose reducer rings (which are not

made according to SKIL’s specications) can lead to

hazardous situations

• Never use saw blades made of high speed steel (HSS)

• Never use grinding/cutting discs with this tool

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Remove all obstacles on top of as well as underneath the

cutting path before you start cutting

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• Use suitable detectors to find hidden utility lines or

call the local utility company for assistance (contact

with electric lines can lead to re or electrical shock;

damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

DURING USE

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Never use the tool without the original protection guard

system

• Do not attempt to cut extremely small workpieces

• Do not work overhead with the tool

• In case of jamming or electrical or mechanical

malfunction, immediately switch o the tool and

disconnect the plug

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

• After switching o your circular saw, never stop the

rotation of the saw blade by a lateral force applied against

EXPLANATION OF SYMBOLS ON TOOL

2 Read the instruction manual before use

3 Double insulation (no earth wire required)

4 Do not dispose of the tool together with household waste

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• Changing saw blade 5

! disconnect the plug

- take hex key A from storage B

- open lower guard C with lever D

! change saw blade with saw teeth and arrow

printed on saw blade pointing in same direction

as arrow on upper guard E

! make sure that clamping surfaces F of flanges

are perfectly clean and face the blade

- tighten blade bolt G with hex key 1/8 turn past nger

tight (ensures slippage of saw blade when it

encounters excessive resistance thus reducing motor

overload and saw kickback)

• Storage for hex key 6

Skil 5740 aa Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skil 5740 aa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info