Bedienungsanleitung Skil 6225 (Seite 10 von 104) (Alle Sprachen)

758383

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 82 dB(A) and the sound

power level 93 dB(A) (standard deviation: 3 dB), and the

vibration ✱ (triax vector sum; uncertainty K = 1.5 m/s²)

✱when drilling in metal < 2.5 m/s²

✱when impact drilling in concrete 12.5 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Perceuse à percussion/visseuse 6225

INTRODUCTION

• Cet outil est conçu pour les travaux perçage de

percussion dans la brique ainsi que le perçage dans le

bois, le métal, la céramique et les matières plastiques;

les outils avec réglage électronique de la vitesse et

rotation à droite/à gauche sont également appropiés

pour le vissage et le letage

• Cet outil n’est pas conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur de marche/arrêt et réglage de vitesse

B Commutateur pour inverser le sens de rotation

C Mandrin auto-serrant

D Anneau pour réglage du couple

E Position de perçage

F Position de perçage à percussion

G Commutateur de vitesse

H Fentes de ventilation

-position F will lock up the clutch to permit impact drilling

only

! ensure that gear selector G is in position HIGH

when clutch ring D is in impact drilling position

! do not use impact drilling position F for drilling in

wood, metal, ceramic and plastic to prevent the

drill/screw bit from being damaged

• Mechanical gear selection w

-set selector G to desired speed

! actuate the gear selector while tool is running

slowly

LOW

-low speed

-high torque

-for screwdriving and drilling large diameters

-for tapping thread

HIGH

-high speed

-lower torque

-for drilling small diameters

• Holding and guiding the tool e

! while working, always hold the tool at the grey-

coloured grip area(s)

-keep ventilation slots H 2 uncovered

-do not apply too much pressure on the tool; let the tool

do the work for you

APPLICATION ADVICE

• Use the appropriate bits r

! only use sharp bits

• When drilling ferrous metals

-pre-drill a smaller hole, when a large hole is required

-lubricate drill bit occasionally with oil

• When turning in a screw at/near the cross cut end or an

edge of wood, pre-drill a hole in order to avoid cracking

of the wood

• For an optimal use of the tool a steady pressure on the

screw is required, especially while removing

• When screwdriving in hard wood one should pre-drill a

hole

• Splinterfree drilling in wood t

• Dustfree drilling in walls y

• Dustfree drilling in ceilings u

• Drilling in tiles without skidding i

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots G 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 6225 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info