Bedienungsanleitung Skil 6398 (Seite 11 von 104) (Alle Sprachen)

758378

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

NOISE / VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 100 dB(A) and the sound

power level 111 dB(A) (standard deviation: 3 dB), and the

vibration . (triax vector sum; uncertainty K = 1.5 m/s²)

. when drilling in metal 7.1 m/s²

. when impact drilling in concrete 17.0 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

!

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Perceuse à percussion 6395/6398

INTRODUCTION

• Cet outil est conçu pour les travaux de perçage de

percussion dans la brique, le béton et dans la pierre

naturelle ainsi que le perçage dans le bois, le métal, la

céramique et les matières plastiques

• Cet outil n'est conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L'OUTIL 2

A Interrupteur de marche/arrêt et réglage de vitesse

B Bouton de blocage de l’interrupteur

C Molette de réglage de la vitesse maximum

D Commutateur pour inverser le sens de rotation

E Commutateur pour sélectionner la fonction de perçage

F Indicateur de la fonction de perçage sélectionnée

G Bouton de blocage de l'arbre (6398)

H Poignée auxiliaire

J Jauge de profondeur

K Fentes de ventilation

SECURITE

AVERTISSEMENTS DE SECURITE GENERAUX POUR

L'OUTIL ELECTRIQUE

AVERTISSEMENT Lisez tous les avertissements

de sécurité, les instructions, les illustrations et les

 Ne pas

suivre les instructions énumérées ci-dessous peut provoquer

un choc électrique, un incendie et/ou une blessure sérieuse.

Conservez tous les avertissements et toutes les

• Normal drilling versus impact drilling w

-indicator F shows the selected drilling function

!select drilling function only when tool is switched



• Changing bits e

!

standstill (6398)

-insert the bit as deep as possible in the chuck

!do not use bits with a damaged shank

• Adjusting drilling depth r

• Holding and guiding the tool t

!

coloured grip area(s)

-always use auxiliary handle H 2 (can be adjusted

as illustrated)

-keep ventilation slots K 2 uncovered

-do not apply too much pressure on the tool; let the tool

do the work for you

APPLICATION ADVICE

• Use the appropriate bits y

!only use sharp bits

• For drilling in concrete or stone a steady pressure on the

drill is required

• When drilling ferrous metals

-pre-drill a smaller hole, when a large hole is required

-lubricate drill bit occasionally with oil

• Splinterfree drilling in wood u

• Dustfree drilling in walls i

• Dustfree drilling in ceilings o

• Drilling in tiles without skidding p

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots K 2)

!disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 6398 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info