Bedienungsanleitung Skil 6420 (Seite 7 von 100) (Alle Sprachen)

644678

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

 Never use the tool when cord is damaged; have it

replaced by a qualied person

ACCESSORIES

 SKIL can assure awless functioning of the tool only

when original accessories are used

 Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

DURING USE

 Always keep the cord away from moving parts of the tool

 If the drill bit becomes unexpectedly jammed (causing

a sudden, dangerous reaction), immediately switch o

the tool

 Hold the power tool only by the insulated gripping

surfaces when performing an operation where the

accessory may contact hidden wiring or its own

power cord (contact with a “live” wire will also make

exposed metal parts of the power tool “live” and shock

the operator)

 In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

 If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

AFTER USE

 When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

EXPLANATION OF SYMBOLS ON TOOL

Read the instruction manual before use

Double insulation (no earth wire required)

Do not dispose of the tool together with household

waste material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

 Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

 If for any reason the old plug is cut o the cord of

this tool, it must be disposed of safely and not left

unattended

USE

 On/o

 Switch locking for continuous use

 Speed control for smooth starting

 Maximum speed control

With wheel C the maximum speed can be adjusted from

low to high

- switch on the tool

- lock the switch

- turn wheel C to select maximum speed

 Changing direction of rotation

- when not properly set in left/right position, switch A

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

 Normal drilling versus impact drilling

- indicator F shows the selected drilling function

! select drilling function only when tool is switched



 Changing bits

! 

standstill

- insert the bit as deep as possible in the chuck

! do not use bits with a damaged shank

 Adjusting drilling depth

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any



operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous

situation.

5) SERVICE

a) 

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR IMPACT DRILLS

GENERAL

 This tool should not be used by people under the age

of 16 years

 Always disconnect plug from power source before

making any adjustment or changing any accessory

 Wear ear protectors (exposure to noise can cause

hearing loss)

 Use auxiliary handle(s), if supplied with the tool

(loss of control can cause personal injury)

 Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

 Do not work materials containing asbestos

(asbestos is considered carcinogenic)

 Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

 Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

 Follow the dust-related national requirements for the

materials you want to work with

BEFORE USE

 Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

 Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

 Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

Skil 6420 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info