● Use of dust filter system
- the dust filter system with its telescopic action can be
used in both horizontal and vertical working positions
- dust box K ! keeps hanging down straight in all side
handle positions
- ensure that the dust filter system firmly rests against
the wall/floor/ceiling (which also ensures drilling at a
straight 90° angle) $
! always pull switch A 2 to the maximum + select
position 5 with wheel C 2 when using the dust
filter system
- remove drill bit from hole while tool is running to
ensure dust suction performance
- when dust filter system is not mounted, tool can be
used again for drilling wood, metal and plastic
● Left- and right-hand use of side handle/dust filter
system %
● Cleaning filter and dust box ^
In case of reduced dust suction performance, or when
the collected dust has reached "MAX"-level M, filter J
and dust box K should be cleaned
- remove dust box K from dust filter system by pressing
two red tabs N and slightly turning dust box towards
you
- remove filter J from dust box K and knock dust off of
filter
! do not wash filter with soap and water
- empty dust box K
- put back filter J in dust box K until it snaplocks
- slide dust box K onto dust filter system until it
snaplocks
- mount spare filter bag as illustrated, when necessary &
APPLICATION ADVICE
● Use the appropriate bits *
! only use sharp bits
● For drilling in concrete or stone a steady pressure on the
drill is required
● When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
● When turning in a screw at/near the cross cut end or an
edge of wood, pre-drill a hole in order to avoid cracking
of the wood
● Splinterfree drilling in wood )
● Drilling in tiles without skidding ¡
● For more tips see www.skileurope.com
GUARANTEE / ENVIRONMENT
● Always keep tool and cord clean (especially the
ventilation slots)
! disconnect the plug before cleaning
● This SKIL product is guaranteed in accordance with
statutory/country-specific regulations; damage due to
normal wear and tear, overload or improper handling will
be excluded from the guarantee
● In case of a complaint, send the tool undismantled
together with proof of purchase to your dealer or the
nearest SKIL service station (addresses as well as the
service diagram of the tool are listed on
www.skileurope.com)
● Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol ™ will remind you of this when the need for
disposing occurs
Perceuse à percussion 6692/6772
INTRODUCTION
● L’outil est conçu pour les travaux de perçage en frappe
dans la brique, le béton et dans la pierre naturelle ainsi
que le perçage dans le bois, le métal, la céramique et
les matières plastiques; les outils avec réglage
électronique de la vitesse et rotation à droite/à gauche
sont également appropiés pour le vissage et le filetage
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
A Interrupteur pour mise en marche/arrêt et réglage de la
vitesse
B Bouton de blocage de l’interrupteur
C Molette de réglage de la vitesse maximum
D Commutateur pour inverser le sens de rotation
E Commutateur pour sélectionner la fonction de perçage
F Poignée auxiliaire
G Bouton de blocage
H Système de filtre à poussière
SECURITE
INSTRUCTIONS GENERALES DE SECURITE
ATTENTION! Lisez toutes les instructions. Le non-
respect des instructions indiquées ci-après peut entraîner
un choc électrique, un incendie et/ou de graves blessures
sur les personnes. La notion d’«outil électroportatif»
mentionnée par la suite se rapporte à des outils électriques
raccordés au secteur (avec câble de raccordement).
1) PLACE DE TRAVAIL
a) Maintenez l’endroit de travail propre et bien éclairé.
Un lieu de travail en désordre ou mal éclairé augmente
le risque d’accidents.
