Bedienungsanleitung Skil 6901 (Seite 11 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381378

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

• Maximum speed control 7

With wheel B 2 the maximum speed can be adjusted

from low to high

- switch on the tool

- lock the switch

- turn wheel B to select maximum speed

• Changing direction of rotation 8

- when not properly set in left/right position, switch

A 2 cannot be activated

- indicator E shows the selected direction of rotation

! change direction of rotation only when tool is at a

complete standstill

• Normal drilling/screwdriving versus hammer drilling 9

- indicator G shows the selected drilling function

! select drilling function only when tool is switched

off and plug is disconnected

• Changing bits 0

- insert the bit as deep as possible in the chuck

! do not use bits with a damaged shank

• Adjusting drilling depth !

• Cable clip @

For easy and convenient storage

• Holding and guiding the tool #

! while working, always hold the tool at the grey-

coloured grip area(s)

- always use auxiliary handle J 2 (can be adjusted

as illustrated)

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let the

tool do the work for you

APPLICATION ADVICE

• Use the appropriate bits $

! only use sharp bits

• For drilling in concrete or stone a steady pressure on

the drill is required

• When drilling ferrous metals

- pre-drill a smaller hole, when a large hole is required

- lubricate drill bit occasionally with oil

• When turning in a screw at/near the cross cut end or an

edge of wood, pre-drill a hole in order to avoid cracking

of the wood

• Splinterfree drilling in wood %

• Dustfree drilling in walls ^

• Dustfree drilling in ceilings &

• Drilling in tiles without skidding *

• For more tips see www.skileurope.com

• Vibration level

The vibration emission level stated at the back of this

instruction manual (indicated by an asterisk) has been

measured in accordance with a standardised test given

in EN 60745; it may be used to compare one tool with

another and as a preliminary assessment of exposure to

vibration when using the tool for the applications

mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may

signiﬁ cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may

signiﬁ cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol $ will remind you of this when the need for

disposing occurs

Perceuse à percussion 6900/6901

INTRODUCTION

• Cet outil est conçu pour les travaux de perçage en

frappe dans la brique, le béton et dans la pierre

naturelle ainsi que le perçage dans le bois, le métal, la

céramique et les matières plastiques; les outils avec

réglage électronique de la vitesse et rotation à droite/à

gauche sont également appropiés pour le vissage et le

ﬁ letage

• Lisez et conservez ce manuel d’instructions 3

SPECIFICATIONS TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur de marche/arrêt et réglage de vitesse

B Molette de réglage de la vitesse maximum

C Bouton de blocage de l’interrupteur

D Commutateur pour inverser le sens de rotation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 6901 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info