Bedienungsanleitung Skil 6940 (Seite 8 von 96) (Alle Sprachen)

644675

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

APPLICATIONADVICE

• When turning in a screw at/near the cross cut end or an

edge of wood, pre-drill a hole in order to avoid cracking of

the wood

• When screwdriving in hard wood one should pre-drill a

hole

• For an optimal use of the tool a steady pressure on the

screw is required, especially while removing

MAINTENANCE/SERVICE

• Always keep tool and cord clean (especially ventilation

slots H 2)

! disconnecttheplugbeforecleaning

• If the tool should fail despite the care taken in manufacturing

and testing procedures, repair should be carried out by an

after-sales service centre for SKIL power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skilmasters.com)

• A damaged power cord shall be replaced at a SKIL

service centre only in order to avoid a hazard

ENVIRONMENT

• Donotdisposeofelectrictools,accessoriesand

packagingtogetherwithhouseholdwastematerial

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol # will remind you of this when the need for

disposing occurs

DECLARATIONOFCONFORMITY

• We declare under our sole responsibility that this product

is in conformity with the following standards or

standardized documents: EN 60745, EN 61000,

EN 55014, in accordance with the provisions of the

directives 2004/108/EC, 2006/42/EC

• Technicalfileat: SKIL Europe BV (PT-SEU/PJE),

4825 BD Breda, NL

ÊÆÇÎ¹Æ¼½ÊÄÇÇÌ

Á»½Ê½ËÁ¼½ÆÌ

È½Ê¹ÌÁÇÆËŵÆ¿ÁÆ½½ÊÁÆ¿

ÍÊÇÈ½Ɠˁ˅ʿ˂Ê½¼¹Ɠ

¹ÆÊÇÅÅ½Ä½Æ

ÈÈÊÇÎ¹Ä¹Æ¹¿½Ê

20.07.2011

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 84 dB(A) and the sound

power level 95 dB(A) (standard deviation: 3 dB), and the

vibration <2.5 m/s² (hand-arm method; uncertainty K =

1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintainted accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protectyourselfagainsttheeffectsofvibration

bymaintainingthetoolanditsaccessories,

keepingyourhandswarm,andorganizingyour

workpatterns



Tournevis 6925/6940

INTRODUCTION

• Cet outil à rotation gauche/droite est conçu pour le

vissage et le dévissage des vis

• Lisez et conservez ce manuel d’instruction 3

SPECIFICATIONSTECHNIQUES1

ELEMENTSDEL’OUTIL2

A Interrupteur marche/arrêt

B Bouton de blocage de l’interrupteur

C Levier pour inverser le sens de rotation

D Porte-embout magnétique

E Manchon pour régler la profondeur de vissage

F Agrafe de ceinture

G Dragonne

H Fentes de ventilation

SECURITE

INSTRUCTIONSGENERALESDESECURITE

ATTENTION!Liseztouslesavertissementsde

sécuritéettouteslesinstructions. Ne pas suivre les

avertissements et instructions peut entraîner un choc

électrique, un incendie et/ou de graves blessures sur les

personnes. Conserveztouslesavertissementset

touteslesinstructionspourpouvoirs’yreporter

ultérieurement. La notion d’”outil électroportatif” dans les

avertissements se rapporte à des outils électriques

raccordés au secteur (avec câble de raccordement) et à

des outils électriques à batterie (sans câble de

raccordement).

1)SECURITEDELAZONEDETRAVAIL

a) Maintenezl’endroitdetravailpropreetbienéclairé.

Un lieu de travail en désordre ou mal éclairé augmente le

risque d’accidents.

b) N’utilisezpasl’appareildansunenvironnement

présentantdesrisquesd’explosionetoùse

trouventdesliquides,desgazoupoussières

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 6940 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info