Bedienungsanleitung Skil 7110 bc (Seite 8 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

390206

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted

sanding marks

- keep ventilation slots D 2 uncovered

• Turnable foot (AUTO ‘CLIC’) 7 (7115)

- for changing front tip of sanding sheet/sanding foot

when it is worn or damaged

- for changing foot position depending on working

surface (see: Application advice)

APPLICATION ADVICE

• Use the tool with the delta-tip pointing forward for

edged, narrow and other hard-to-reach places 8

• Use the tool with the ﬂ at side pointing forward for long

strokes on ﬂ at surfaces 9 (7115)

• When the foampad of the delta-tip is worn or damaged

at the top, you may extend its service life twice by

turning it 120° (also applicable to delta sanding sheet) 0

• Never use the same sanding sheet for wood and metal

• Recommended sanding sheet grits:

coarse - for removing paint;

for sanding of extremely rough wood

medium - for sanding of rough or plain wood

ﬁ ne - for smoothing of wood;

for ﬁ nishing of bare wood;

for smoothing surfaces with old paint

• Use different grit sizes when the working surface is

rough:

- start sanding with coarse or medium grit

- ﬁ nish with ﬁ ne grit

• For more tips see www.skileurope.com

• Vibration level

The vibration emission level stated at the back of this

instruction manual has been measured in accordance

with a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may

signiﬁ cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may

signiﬁ cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots D 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol ! will remind you of this when the need for

disposing occurs

Ponceuse delta 7110/7115

INTRODUCTION

• Cet outil sert au ponçage et au polissage à sec du bois,

des surfaces peintes, du plastique, métal et mastic; il se

prête notamment à l’usinage des bords et des endroits

étroits et d’accès difﬁ cile

• Lisez et conservez ce manuel d’instructions 3

SPECIFICATIONS TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Adaptateur de l’aspirateur

B Interrupteur marche/arrêt

C Molette de réglage de la vitesse de ponçage

D Fentes de ventilation

SECURITE

INSTRUCTIONS GENERALES DE SECURITE

ATTENTION! Lisez tous les avertissements de

sécurité et toutes les instructions. Ne pas suivre les

avertissements et instructions peut entraîner un choc

électrique, un incendie et/ou de graves blessures sur les

personnes. Conservez tous les avertissements et

toutes les instructions pour pouvoir s’y reporter

ultérieurement. La notion d’”outil électroportatif” dans les

avertissements se rapporte à des outils électriques

raccordés au secteur (avec câble de raccordement).

1) SECURITE DE LA ZONE DE TRAVAIL

a) Maintenez l’endroit de travail propre et bien éclairé.

Un lieu de travail en désordre ou mal éclairé augmente

le risque d’accidents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7110 bc Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info