Bedienungsanleitung Skil 7375 (Seite 9 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

79046

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

- mount corresponding VELCRO sanding sheet to

sanding attachment

- 3 sanding positions

• Mounting “Louvre” attachment 9 (7375)

- remove VELCRO sanding sheet

- remove delta tip A while pushing button B

- mount “Louvre” attachment as illustrated

• Dust suction 0

- empty dustbox F regularly for optimal dust pick-up

performance

! do not use dustbox when sanding metal

• Pressure control ! (7375)

Warns the user when applying too much pressure on

the tool while working (too much pressure reduces the

sanding performance)

- green light 1 turns on when running tool is placed on

workpiece

- green light 2 turns on in case of pressure

- green light 3 turns on in case of increased pressure

- red light 4 turns on when pressure is too high

• On/off switch

- switch on/off the tool by pushing switch G 2

forward/backwards

! before the sanding surface reaches the

workpiece, you should switch on the tool

! before switching off the tool, you should lift it

from the workpiece

• Holding and guiding the tool @

- guide the tool parallel to the working surface

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted

sanding marks

! while working, always hold the tool at the grey-

coloured grip area(s)

- keep ventilation slots J 2 uncovered

APPLICATION ADVICE

• Use the tool as an orbital sander for large working

surfaces #

• Use the tool as a delta-sander for corners and edges $

• Use the tool with the special sanding attachments for

hard-to-reach places %

• When the foampad of the delta-tip is worn or damaged

at the top, you may extend its service life twice by

tearing it off, turning it 120° and putting it back (also

applicable to delta sanding sheet) ^

• When cord needs to be replaced, ﬁ rst remove foot-plate

as illustrated &

• Never use the same sanding sheet for wood and metal

• Recommended sanding sheet grits:

coarse - for removing paint;

for sanding of extremely rough wood

medium - for sanding of rough or plain wood

ﬁ ne - for smoothing of wood;

for ﬁ nishing of bare wood;

for smoothing surfaces with old paint

• Use different grit sizes when the working surface is

rough:

- start sanding with coarse or medium grit

- ﬁ nish with ﬁ ne grit

• For more tips see www.skileurope.com

• Vibration level

The vibration emission level stated at the back of this

instruction manual has been measured in accordance

with a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may

signiﬁ cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may

signiﬁ cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots J 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol * will remind you of this when the need for

disposing occurs

Ponceuse polyvalente 7370/7375

INTRODUCTION

• Cet outil sert au ponçage et au polissage à sec du bois,

des surfaces peintes, du plastique et du mastic

• Lisez et conservez ce manuel d’instructions 3

SPECIFICATIONS TECHNIQUES 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7375 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info