Bedienungsanleitung Skil 7455 (Seite 7 von 104) (Alle Sprachen)

591196

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

DECLARATION OF CONFORMITY

Orbital sander 7445/7455

Technical data

 We declare under our sole responsibility that the product

described under “Technical data” is in conformity with

the following standards or standardization documents:

EN 60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2014/30/EU, 2006/42/EC,

2011/65/EU

 : SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

16.05.2013

SKIL Europe BV, 4825 BD Breda, NL

Marijn van der Hoofden

Operations & Engineering

Olaf Dijkgraaf

Approvals Manager

19.09.2014

NOISE/VIBRATION

 Measured in accordance with EN 60745 the sound

pressure level of this tool is 82 dB(A) and the

sound power level 93 dB(A) (standard deviation: 3

dB), and the vibration 7.8 m/s² (triax vector sum;

uncertainty K = 1.5 m/s²)

 The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Ponceuse excentrique 7445/7455

INTRODUCTION

 Cet outil est conçu pour le ponçage à sec du bois,

plastique, métal et mastic et des surfaces peintes

 Cet outil n'est conçu pour un usage professionnel

 Lisez et conservez ce manuel d’instruction

CARACTERISTIQUES TECHNIQUES



A Support plateau

B Vis du support plateau

C Feuille de ponçage

D Réservoir à poussière

E Bouton de retrait du réservoir à poussière

! 

from the workpiece

 Speed control

(7455)

For optimal sanding results on dierent materials

- with wheel J

you can set the desired sanding speed

- always adjust speed to grit size used

- before starting a job, nd the optimal speed and grit by

testing out on spare material

 Holding and guiding the tool

! 

coloured grip area(s)

- guide the tool parallel to the working surface and move

it in circles or in a cross pattern

- do not apply too much pressure on the tool; let the tool

do the work for you

- do not tilt the tool in order to avoid unwanted sanding

marks

- keep ventilation slots K

uncovered

 Sanding

- the amount of material removed is determined by

the selection of the sanding sheet, the preselected

sanding speed and the applied pressure

! 

to an increase of the sanding capacity, but to

increased wear of the tool and the sanding sheet

! never use the same sanding sheet for wood and

metal

APPLICATION ADVICE

 For determining the optimal grit (and speed), table

can be used as reference

! 

 For more tips see www.skil.com

MAINTENANCE / SERVICE

 This tool is not intended for professional use

 Always keep tool and cord clean (especially ventilation

slots K

)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

 If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

 Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol

will remind you of this when the need for

disposing occurs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7455 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info