Bedienungsanleitung Skil 7615 (Seite 9 von 116) (Alle Sprachen)

758578

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

• Use dierent grit sizes when the working surface is

rough:

-start sanding with coarse or medium grit

-nish with ne grit

• For more information see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots J 2)

-remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the tool will be excluded from the warranty

(for the SKIL warranty conditions see www.skil.com or

ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 88.0 dB(A) and the sound

power level 99.0 dB(A) (uncertainty K = 3 dB), and

the vibration 4.52 m/s² (triax vector sum; uncertainty

K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

-remove sanding belt

-insert new belt with arrows printed at inner side of belt

pointing in same direction as arrow D on tool

-push lever back

! change sanding belts in time

! never fold sanding belts

• Automatic belt centering (ABC)

-centers belt automatically when switching on tool

-keeps belt centered while sanding

In case belt runs o tool (mostly caused by inferior belt

quality), you should

-switch on the tool

-adjust screw E 2 till the sanding belt is running in line

with the at side of the tool

-use new belt, if belt still runs o tool

• Dust suction 7

! do not use dust box/vacuum cleaner when

sanding metal

Dust box

-empty dust box G regularly for optimal dust pick-up

performance

-when necessary, also clean the lter as illustrated

-remove dust box G by pulling dust box G backwards

For using vacuum cleaner

-mount vacuum cleaner adapter H as illustrated

-connect vacuum cleaner hose to vacuum cleaner

adapter H

• Overload Alert 8

Warns the user when applying too much pressure on

the tool while working (too much pressure reduces the

sanding performance)

-green light 1 turns on when running tool is placed on

workpiece

-green light 2 turns on in case of increased pressure

-red light 3 turns on when pressure is too high

• Holding and guiding the tool 9

-guide the tool parallel to the working surface

! while working, always hold the tool at the grey-

coloured grip area(s)

! do not apply too much pressure on the tool; let the

sanding surface do the work for you

-do not tilt the tool in order to avoid unwanted sanding

marks

-keep ventilation slots J 2 uncovered

APPLICATION ADVICE

• For sanding bare wood surfaces move the tool in straight

movements in line with the grain

• For sanding all other surfaces move the tool in oval

movements over the material

• Mount sanding frame K for equalizing surfaces without

scratches or grooves, and ensure it is in place securely

! sanding frame K becomes hot during use; do not

touch it before it has cooled down

• Never use the same sanding belt for wood and metal

• Recommended sanding belt grits:

-for removing paint and for sanding of extremely rough

wood use coarse grit sizes (40, 60)

-for sanding of rough or plain wood use medium grit

sizes (80, 100, 120)

-for smoothing of wood and surfaces with old paint as

well as for nishing of bare wood use ne grit sizes

(180, 240, 320)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7615 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info