Bedienungsanleitung Skil 7710 AA (Seite 7 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

482562

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

• Speed control 5

- select working speed by sliding switch A into desired

position

1 = low speed for precision work

2 = medium speed

3 = high speed for quick removal of material

- the optimal working speed depends on the material

and can be determined with practical trials

• Operating the tool

! wear protective gloves and use safety glasses

- mount desired accessory

- switch on the tool

- advance the tool to the material/location to be

scraped

- start with a ﬂ at angle and light pressure

- work away from the body

- be aware that the stroke motion of the tool is only

produced when pressure is applied to the material to

be removed

- be aware that too much pressure may cause damage

to the background material

! do not overload the tool

! allow tool and accessory to cool down between

the individual work steps

• Sharpening of accessories

- with sharp accessories, good working performance

and a long service life can be achieved

- sharpen the steel accessories before they come dull

APPLICATION ADVICE

• Use accessory G for working on hard materials 6

! soft materials (such as wood and aluminium) can

be easily damaged with extra sharp blades

Possible applications are:

- removal of carpet adhesive and foam-, plaster-,

mortar- remains as well as remains of joint material

- smoothing of unevennesses

- removal of ﬂ oor coverings

! hold the tool firmly with both hands and take a

secure stance

• Use accessory H for working on soft materials 7

Possible applications are:

- removal of paint residue, silicon and plaster as well

as stucco from glass and plastic panels

- smoothing and removing of adhesive and sealing

residues from wooden ﬂ ooring

• Use accessory J for carving work 8

- carving is possible only in wood with short ﬁ bres

(such as linden and poplar)

! hold the tool firmly with both hands and take a

secure stance

• Use accessory K for removing sealing from window

joints or remains from door rabets 9

• Vibration level

The vibration emission level stated at the back of this

instruction manual has been measured in accordance

with a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may

signiﬁ cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may

signiﬁ cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots F 3)

- clean the tool with a dry, soft cloth (do not use

cleaning agents or solvents)

! disconnect the plug before cleaning

• Keep tool as well as accessories free from adhesives or

any other residuary material

• Always store the tool indoors in its protective carton/

case

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 0 will remind you of this when the need for

disposing occurs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7710 AA Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info