Bedienungsanleitung Skil 8003 CC (Seite 8 von 196) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

482552

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

upright position; when doing so, make

sure no combustible materials or

inammable gases are in the proximity

• Do not store/leave the tool outdoors

• Store the tool in a dry and locked-up

place, out of reach of children



• On/o switch with 3 temperature

settings 4

 2



- switch on the tool by pushing

switch A in desired position:

1 = 50°C, air ow 250 litres/minute

2 = 400°C, air ow 250 litres/

minute

3 = 570°C, air ow 500 litres/

minute

- when using it for the rst time,

some smoke may emit from the

tool; this is normal and will soon

cease

- switch o the tool by pushing

switch A in position “0”

• General use

- determine the right temperature by

testing out on an inconspicuous

part of the workpiece; start with a

low temperature setting

- the temperature falls as the

distance between the air outlet/

nozzle and the workpiece

increases

- the temperature required depends

on the material to be worked on

• Stationary use 5

- set the tool down on its rear in an

upright position

- make sure the surface is clean and

dustfree; polluted air damages the

motor

- make sure the air ow is directed

away from you

- secure the cord to prevent pulling

down the tool

- do not touch the air outlet/nozzle

- make sure nothing drops into the

air outlet/nozzle

- carefully hold the tool with one

hand while switching it o with the

other hand, and then allow it to

cool down

• Use at hard-to-reach places

- remove ring B 2, thus releasing

the metal air outlet over a greater

distance

 



• Holding and guiding the tool 6

- hold the tool with one hand

- keep ventilation slots E 2

uncovered

• SKIL accessories (

) 7

- glass protection nozzle F (for

deecting air ow)

- at nozzle G (for broadening air

ow)

- reector nozzle H (for reecting air

ow)

- reduction nozzle J (for

concentrating air ow)

All application examples (

) can

be performed without accessories;

however, using the appropriate

accessory simplies the work and

signicantly improves the quality of the

results

• Mounting/removing accessories

()

- simply t the accessory onto air

outlet C 2

- remove an accessory by pulling it

o to the front after it has cooled

down

 







• Constant heat control (overload

protection)

Protects heating element from

damage when tool is overloaded

without having to stop it and/or let it

cool down for a period of time

- when the temperature gets too

high, the heating element switches

itself o, while the motor continues

to run and produces cold air

- when the temperature has fallen

down suciently (taking only a few

seconds), the heating element will

be switched on automatically

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 8003 CC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info