Bedienungsanleitung Skil 8007 (Seite 9 von 152) (Alle Sprachen)

644680

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

• Removing paint/lacquer next to glass @

- always use glass protection nozzle G when working

next to glass

- remove the paint with a hand scraper

! do not use the tool for removing paint on

metal-framedwindows;metalisheat-conducting

which might lead to breaking of the glass

• Removing stickers (use at nozzle H) #

- many adhesives become softer when heated, allowing

adhesive bonds to be separated and superuous

adhesive to be removed

! heat sticker on the upper side

! always take care not to overheat the underlying

surface

OTHER APPLICATION EXAMPLES:

★ removing linoleum and vinyl carpeting

★ removing carpet tiles made of synthetic bres

★ removing veneers/applying veneer strips

★ softening/melting tar, tin, bitumen, wax (use at nozzle H)

★ waxing (skis, furniture) (use at nozzle H) $

★ removing resin

★ loosening rusty/too tightly fastened metal screws, nuts

and bolts

★ removing candle wax (do not overheat the

underlying surface)

★ repairing broken candles/restoring bent candles to

their original shape

• Shrink tting %

- use reector nozzle J or reduction nozzle K

- select a shrink-t tube with a diameter matching that of

the workpiece

- heat the shrink-t tube evenly

OTHER APPLICATION EXAMPLE:

★ shrink-wrapping

• Soldering water pipes ^

This tool is most suitable for working with soft solders

(melting point below 400°)

- use reector nozzle J

- thoroughly clean both joining sections before

soldering

- pre-heat both sections and apply soldering wire (do

not use lead-based soldering wire)

• Thawing out frozen water pipes &

- use reector nozzle J

- heat the frozen area evenly

! water pipes are often difficult to distinguish from

gaspipes;heatinggaspipesisextremely

dangerous – risk of explosion

OTHER APPLICATION EXAMPLES:

★ thawing out water pipes made of PVC (position II,

max. 60°C)

★ thawing out frozen car locks (position II, max. 60°C)

(use reduction nozzle K)

★ defrosting freezers (do not damage the plastic

housing)

★ thawing out ice-covered steps and pavements

• Shaping plastic tubes

- use reector nozzle J

- ll the tube with sand and seal it at both ends, to avoid

kinking of the tube

- heat the tube evenly by moving it from side to side

OTHER APPLICATION EXAMPLES:

★ shaping all plastics with a low melting-point

(polyethylene, PVC etc.)

★ shaping all plastics with a high melting-point (acrylic

glass, Plexiglas etc.)

★ shaping and bending carpet tiles made of synthetic

bres

★ shaping and bending of wood (model-building)

• Welding plastics

- the weld seam must be clean and grease-free

- keep welding rod close to weld seam and apply heat,

until the welding rod gets tacky

- remove heat, when weld seam is lled up

OTHER APPLICATION EXAMPLES:

★ repairing of surfboards, skis and other synthetic sports

goods (use at nozzle H)

★ welding PVC-materials

★ smoothing blisters after sticking PVC-labels

★ connecting garden hoses (use reector nozzle J)

• Drying

! only dry with a low or medium temperature

setting (position 1 or 2) and with an increased

distance between the tool and the workpiece

- drying of paint, varnish, gypsum, mortar and plaster

- drying wet timber prior to lling

- drying thickly applied ller or adhesive quickly

drying building joints before spraying insulation or sealan

- drying joints and cracks in boatbuilding

• Cleaning/disinfecting

- disinfecting rabbit hutches, dove cotes, etc. (remove

your pet first)

- combatting ant colonies

- combatting woodworms and boring beetles (hold the

tool at an adequate distance from the wood)

- eliminating weeds

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially ventilation

slots F 2)

• Never use easy inammable liquids for cleaning the heat

gun in general and the air outlet/nozzle in particular

•

If the tool should fail despite the care taken in manufacturing

and testing procedures, repair should be carried out by an

after-sales service centre for SKIL power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skilmasters.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol * will remind you of this when the need for

disposing occurs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 8007 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info