Bedienungsanleitung Skil 8100 (Seite 9 von 160) (Alle Sprachen)

591190

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

- always hold the tool rmly with both hands, so you will

have full control of the tool at all times

- pay attention to the direction of rotation; always hold

the tool so, that sparks and grinding/cutting dust y

away from the body

- for a better grip use hand strap P as illustrated

- provide for a secure stance

- keep ventilation slots Q

uncovered

APPLICATION ADVICE

 For sanding with high removal performance use the tool

in combination with cleaning disc D

 For nishing mount backing pad G

with sanding

sheet H

 For polishing mount backing pad G

with wool bonnet

 For more tips see www.skil.com

MAINTENANCE / SERVICE

 This tool is not intended for professional use

 Always keep tool and cord clean (especially ventilation

slots Q

)

! do not attempt to clean ventilation slots by

inserting pointed objects through openings

! disconnect the plug before cleaning

 When too much paint is embedded into cleaning disc D

, clean the disc as follows:

- run the disc momentarily on a concrete sidewalk or a

large concrete block for knocking the paint loose from

the disc

- ensure the cleaning surface is stable

! never immerse the cleaning disc into a solvent

such as turpentine

 If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

 Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol

will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

 We declare under our sole responsibility that the product

described under "Technical data" is in conformity with

the following standards or standardization documents:

EN 60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2004/108/EC, 2006/42/EC,

2011/65/EU

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

 Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

 If for any reason the old plug is cut o the cord of

this tool, it must be disposed of safely and not left

unattended

USE

 Changing cleaning discs

! disconnect the plug

- remove clamping ange A with accessory key B while

pushing spindle-lock button C

- remove old cleaning disc D and place new one onto

spindle E

- tighten clamping ange A with accessory key B while

pushing spindle-lock button C

 Mounting/removing backing pad/sanding sheet/wool

bonnet

! disconnect the plug

- remove cleaning disc D

, clamping ange A

and

mounting ange F

- screw VELCRO backing pad G onto spindle E while

pushing spindle-lock button C

- for sanding simply press sanding sheet H onto

VELCRO backing pad G

- for polishing simply press wool bonnet J onto VELCRO

backing pad G

- for removing backing pad/sanding sheet/wool bonnet

handle vice-versa

! replace damaged backing pads immediately

 Auxiliary handle

- press two buttons K simultaneously to unlock handle L

- handle L will lock into place when fully vertical or

horizontal

 Dust suction

- connect vacuum cleaner to extension M

! do not use vacuum cleaner when sanding metal

 On/o locking switch N

- switch on tool

! be aware of the sudden impact when the tool is

switched on

! before the accessory reaches the workpiece, the

tool should run at full speed

- unlock switch/switch o tool

! 

from the workpiece

! the accessory continues to rotate for a short time



 Before using the tool

- ensure that accessory is correctly mounted and rmly

tightened

- check if accessory runs freely by turning it by hand

- test-run tool for at least 60 seconds at highest no-load

speed in a safe position

- stop immediately in case of considerable vibration or

other defects and check tool to determine the cause

 Operating the tool

! 

- move the tool back and forth with moderate pressure

- always tilt the tool somewhat when working

 Holding and guiding the tool

! 

coloured grip area(s)

Skil 8100 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info