Bedienungsanleitung Skoda BOLERO - 2009 (Seite 6 von 26) (Englisch)

678434

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

General information4

Enter code

– If a keypad appears after switching on with the command to enter the

code, the unit can be unlocked by entering the correct four-digit code

number. The number of the possible attempts is shown in the second

display line.

– Press directly a digit from to on the digit block displayed on the

display. The digit is accepted in the entry line.

– After a four-digit order has been entered, the group of digits will turn

grey (inactive) and no further digits can be accepted in the entry line.

– Press on the display to erase the digits in the entry line from right

to left and thereby correct your input, if necessary.

– If the correct code number is displayed in the entry line, press .

Code number

The code number can only be called up “online” via the Škoda system, as this guar-

antees even more effective anti-theft protection. Please contact your Škoda dealer

if necessary.

Incorrect code number

If an incorrect code is confirmed after input, the procedure can be repeated one

more time. The number of attempts is shown in the second display line.

If the code number is entered incorrectly for the second time, the unit will be

blocked for approx. one hour. The safety code can only be entered again after one

hour has expired, with the unit switched on and the ignition key in the ignition lock.

If two invalid attempts are then made again, the navigation system will be blocked

again for an hour.

The cycle - two attempts, blocked for an hour - will continue to apply.

Note

The code is normally stored in the instrument cluster. This ensures that it is auto-

matically decoded (convenience coding). Manual input of the code is normally not

necessary.

General operation

“Scrollbar”

The vertical bar on the right side of the display with a sliding regulator between the

arrow keys and is called a “scroll bar”. It indicates that further menu entries

become visible if the sliding regulator is moved completely to the bottom.

Display set-ups

In a set-up menu a set-up or value is infinitely adjustable. Move the sliding regu-

lator  or press or to change a setting. Press the function key , to take

over a changed setting and to switch back to the initial menu.

“Pop-up window”

A function key with an arrow  behind another function key shows the presently

selected set-up, e.g. with an .

If you press on the function key on the display, a so-called “pop-up window”

will open where all the set-up options are displayed.

Briefly press the desired set-up option. The pop-up window is closed and the

setting you have selected is displayed. To close the pop-up window without

changing the set-up, press the function button in the pop-up window .

“Check-box”

There is a so-called “check box” in front of a function which can only be switched

on or off. A tick in the check-box  indicates that the function is switched on, an

empty check-box , indicates that it is switched off.

Briefly press the corresponding function key for switching on and off.

0 9



 

+ - 

Confirmation tone  Off

 Off



s1ok.1a.book Page 4 Monday, March 30, 2009 3:29 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - 2009 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda BOLERO - 2009

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info