Bedienungsanleitung Skoda BOLERO - 2009 (Seite 9 von 26) (Englisch)

678434

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Basic setting 7

– Briefly press the Set button to terminate the manual frequency selec-

tion and to display once again the lower function keys.

Storing a radio station on a displayed station key

– Continue to press one of the six station keys to displayed in

the main menu RADIO until a signal tone sounds. The currently heard

radio station is then stored on this station key.

Deleting a radio station from the memory list

– Press the button in the main menu RADIO to open the

memory list.

– Press the function key behind the station you wish to delete.

– Confirm the safety interrogation by pressing to remove the

station finally from the memory list.

If the currently heard radio station is already stored in the memory list, the memory

space number is displayed behind the description of the frequency range (FM or

AM).

Use the main menu Setup Radio, to determine which of the six station keys are to

be displayed in the main menu RADIO.

Scan Function

Stations of a waveband can be played briefly one after the other (for ten

seconds).

– Press the set button , the radio searches automatically all available

stations of the current waveband.

– Alternatively, press the function key and press in the

opening pop-up window.

– During the current automatic play the function key will change from

to .

– Press the set button or function key again to end the auto-

matic play of the currently heard radio station.

RDS function

Switching radio text on and off

– Press the function key in the main menu RADIO and

in the opening pop-up window. Instead of the six station keys, the

window for displaying the radio text is now opened in the lower half

of the display.

– The window for displaying the radio text must fade out again to enable

the station keys to be displayed again. Briefly press on the display

window of the radio text.

– Alternatively, press the function key and the function key

shown as highlighted in the opening pop-up window.

RDS (“Radio Data System”) serves to transmit program identification and additional

services therefore also enabling automatic tracking of stations.

In the event of sufficiently satisfactory reception the suitable RDS radio stations will

display the station name instead of the station frequency.

If a radio station sends additional information via the RDS function while a station

is being stored, it can occur that the name of the radio station is later displayed

incorrectly in the memory list.

Traffic information function

Switching traffic information TP (Traffic Program) on or off

– Press on the button , in order to switch the traffic information func-

tion on or off.

The display “TP” in combination with a station name (e. g. in the station or memory

list), indicates a traffic information station.

1 ... 6 ...

Memory

Delete

Extras Scan

Extras  Scan

8  Scan

Extras Radio text

Extras

Radio text

s1ok.1a.book Page 7 Monday, March 30, 2009 3:29 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - 2009 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda BOLERO - 2009

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info