Bedienungsanleitung Skoda BOLERO - 2010 (Seite 6 von 24) (Englisch)

678440

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

General information4

Enter code

If a keypad appears after switching on with the command to enter the

code, the unit can be unlocked by entering the correct four-digit code

number. The number of the possible attempts is shown in the second

display line.

– Press directly a digit from to on the digit block displayed on the

display. The digit is accepted in the entry line.

– After a four-digit order has been entered, the group of digits will turn

grey (inactive) and no further digits can be accepted in the entry line.

– Press on the display to erase the digits in the entry line from right

to left and thereby correct your input, if necessary.

– If the correct code number is displayed in the entry line, press .

Code number

The code number can only be called up “online” via the Škoda system, as this guar-

antees even more effective anti-theft protection. Please contact your authorized

Škoda Service Partner, if necessary.

Incorrect code number

If an incorrect code is confirmed after entry of the code, the procedure can be

repeated once again. The number of attempts is shown in the second display line.

If the code number is entered incorrectly for the second time, the unit will be

blocked for approx. one hour. It is possible to enter again the safety code after one

hour has expired, when the unit and the ignition have been switched on.

If two invalid attempts are then made again, the navigation system will be blocked

again for an hour.

The cycle - two attempts, blocked for an hour - will continue to apply.

General - operation

The screen of the unit is a so-called touch screen (touch-screen). Fields

circled in colour on the touch-screen are presently “active” and are oper-

ated by touching the screen.

“Function keys” on the screen

– Active fields, which call up a function or a Setup, are called “function

keys”.

– By using the function key you can change back from each Setup to

the previous Setup.

Moving objects or regulators

– Place your finger on the display of a moving object on the touch-

screen, for example the “sliding regulator” in a “scrollbar”.

– Now move your finger over the touch-screen without interruption.

The object will follow your movements, but can only be moved within

the pre-defined range.

– Lift the finger from the touch-screen at the desired position.

– To view the displayed Setup section, move the right sliding regulator

in the scrollbar completely to the bottom.

– Alternatively, you can move the sliding regulator on the touch-screen

to the bottom and top by touching the function keys and .

– A sliding regulator in a set-up bar

 can alternatively be moved by

pressing or

“Scrollbar”

The vertical bar on the right side of the display with a sliding regulator between the

arrow keys and is called a “scroll bar”. It indicates that further Setup entries

become visible if the sliding regulator is moved completely to the bottom.

0 9





 

- +

 

s3p4.a.book Page 4 Friday, March 13, 2009 3:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - 2010 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda BOLERO - 2010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info