Bedienungsanleitung Skoda Bolero - 2014 (Seite 12 von 24) (Englisch)

678548

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RDS function

Switching radio text on and off

›

In the RADIO main menu press the

Extras

button and then the

Radio text

func-

tion button. Instead of the six station buttons, a window now opens in the bot-

tom half of the screen to display the radio text.

›

The window for displaying the radio text must fade out again to enable the sta-

tion keys to be displayed again. Briefly tap in the display window of the radio

text.

›

Alternatively, tap the

Extras

function button and then on the highlighted

Radio Text

function button shown in the opened pop-up window.

RDS (“Radio Data System”) serves to transmit program identification and addi-

tional services therefore also enabling automatic tracking of stations.

In the case of RDS-compatible radio stations, if there is sufficient reception the

station name will be displayed instead of the station frequency.

If a radio station sends additional information via the RDS function while a station

is being stored, it can occur that the name of the radio station is later displayed

incorrectly in the preset list.



Traffic information function

›

Press the

button to switch the traffic information function on or off.

The display “TP” in combination with a station name (e.g. in the station or preset

list), indicates a traffic programme station.

Irrespective of which radio station you are listening to, an additional receiver part

in the device ensures that a traffic information station can always be received as

long as the traffic information function is switched on.

The availability of traffic information monitoring is identified by the letters “TP” at

the top right of the screen.

If no traffic programme station can be received because, for example, radio recep-

tion in general is poor, instead of“TP”,“No TP” will be displayed. Car parks, tun-

nels, tall buildings or mountains can disrupt the radio signal, even causing it to fail

completely.

Incoming traffic announcement

While a traffic bulletin is being played, a pop-up window opens.

To pause the playback of the announcement, in the

Traffic bulletin pop-up win-

dow press

Cancel

the function button. The traffic function remains available but a

subsequent traffic bulletin is played in the current audio mode. Press the function

button

TP deact.

to switch off the traffic information function permanently.

Note

Some radio stations misleadingly identify themselves as traffic programs. It is

therefore not an error with the unit that there are no traffic news on these sta-

tions.



Traffic information memory

Automatic recording of traffic reports

If the traffic information function is switched on and ready to receive the traffic

information station, incoming traffic reports are recorded as long as the ignition is

switched on. This means you can always find out about the current traffic situa-

tion, even if the device is switched off while driving for long periods.

If the car is parked (ignition off) while a traffic radio station is in range and the

traffic is turned on, incoming traffic reports from this station are recorded for two

hours.

When the ignition is switched off, for about five seconds the current traffic infor-

mation station from which traffic reports will be recorded for the next two hours

is shown. During this five-second display you can use the arrow keys on the de-

vice to select another traffic information station from which to record.

If, when the vehicle is not in use, the reception of the set traffic information sta-

tion is too poor because of external influences, it will automatically search for an-

other traffic information station.

A maximum of nine traffic announcements with a total length of up to four mi-

nutes can be recorded. The oldest traffic report will always be overwritten if the

memory is full.

TIM recording times

It is also possible to set two TIM recording times at which the device should also

record traffic information even if the vehicle is switched off. The device then

starts recording all the incoming traffic reports on the traffic information station

set according to the set TIM recording time.



Radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Bolero - 2014 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Bolero - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info