Bedienungsanleitung Skoda Citigo - 2017 (Seite 36 von 160) (Englisch)

678226

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Warning at excessive speeds

The system offers the possibility to set a speed limit beyond which an acoustic

warning signal will sound and the following warning message (MAXI DOT Dis-

play) and the  symbol appears in the display of the instrument cluster.

Adjust the speed limit while the vehicle is stationary

›

Select the menu item

Speed warning at

or  and confirm.

›

Set the desired speed limit.

›

Confirm the set value, or wait several seconds; your settings will be saved

automatically.

Adjusting the speed limit while the vehicle is moving

›

Select the menu item

Speed warning at

or  and confirm.

›

Drive at the desired speed.

›

Confirm the current speed as the speed limit.

The set speed limit can be manually adjusted later if needed.

Reset speed limit

›

Select the menu item

Speed warning at



and confirm.

›

By confirming the speed stored in the memory, the speed limit is reset.

The set driving mode remains stored even after switching the ignition on and

off. If the break in a journey exceeds 2 hours, the pre-set speed limit is deacti-

vated.

Memory

Fig. 27 Memory display: MAXI DOT display / Segment Display

The system stores data from the two memories described below, which are

then displayed at position

» Fig. 27.

“1” - Single-trip memory

Drive data is stored from when the ignition is switched on to when it is switch-

ed off. If the trip is continued within 2 hours after switching off the ignition,

new data will also flow into the calculation of the current driving information.

If the trip is interrupted for more than 2 hours, the memory is automatically

erased.

“2” - Long-term memory

The memory gathers driving information from any number of individual jour-

neys up to a total of 19 hours and 59 minutes driving or 1,999 kilometres driv-

en.

The indicator is automatically set back to zero if one of these two values is ex-

ceeded.

›

To select the preferred memory bank choose the desired specification of

the multi-function display and select by repeatedly confirming the preferred

memory bank.

›

For Deleting the memory for the selected information, hold down the but-

ton confirming the specification.

The following drive data is stored in different memory banks.

▶

Average fuel consumption.

▶

Distance driven.

▶

Average speed.

▶

Driving time.

Note

Disconnecting the vehicle battery will delete all memory data.

MAXI DOT display

 Introduction

The MAXI DOT display is a user interface which, depending on equipment fit-

ted, provides information about the radio, the multifunction display, the assis-

tance systems etc.

The menus with details can be operated and displayed using the buttons on

the operating lever » page 33.



Using the system

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Citigo - 2017 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Citigo - 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info