Bedienungsanleitung Skoda Citigo - 2017 (Seite 95 von 160) (Englisch)

678226

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

With driving mode set, the vehicle will not start up

If the vehicle does not start off, the problem may be that the selector lever is

not completely in the selected position. In such an instance, press the brake

pedal and put the selector lever into the required position.

Manual shifting (Tiptronic)

Fig. 126

Selector lever / display



Read and observe and on page 92 first.

Tiptronic mode makes it possible to manually shift gears on the selector lever.

Switching to manual shifting when the vehicle is stationary

›

Depress the brake pedal.

›

Press the selector lever twice to the left in the spring-tensioned position.

Gear changing

›

To change up, tap the selector lever forwards

» Fig. 126.

›

To change down, tap the selector lever backwards

» Fig. 126.

Switching to manual shifting during driving

›

Press the selector lever towards the left in the spring-tensioned position in

the direction of the arrow and set in position M. The selector lever position

you have engaged is shown in the instrument cluster display » Fig. 126.

Temporarily switching to manual shifting in position D

›

Tilt the selector lever forward

or rearwards

» Fig. 126.

If in a short time, no manual gear change takes place, then the temporary man-

ual shifting switches off.

The gearshift indicator should be observed when changing gear » page 32.

When accelerating, the gearbox automatically shifts up into the higher gear

just before the maximum permissible engine speed is reached. If a lower gear

is selected, the gearbox does not shift down until there is no risk of the engine

overrevving.

Note

It may be beneficial, for example, when travelling downhill, to use manual shift-

ing of gears. Shifting to a lower gear reduces the load on the brakes and hence

the wear of the brakes.

Starting-off and driving



Read and observe and on page 92 first.

Moving off and pausing temporarily

›

Firmly depress and hold the brake pedal.

›

Start the engine.

›

Press the selector lever towards the left in the spring-tensioned position in

the direction of the arrow » Fig. 125 on page 92 and insert into position D .

›

Release the brake pedal and accelerate.

The selector lever position N does not have to be selected when stopping for a

short time (e.g. at a crossroads). However, the brake pedal should be de-

pressed, in order to prevent the vehicle from rolling.

Accelerating hard while in motion (kick-down function)

If the accelerator pedal is depressed while the vehicle is in forward drive mode,

the kick-down function is turned on.

The gear change is adjusted accordingly to achieve maximum acceleration.

WARNING

Rapid acceleration ( e.g. on slippery roads) can lead to a loss of control over

the vehicle – risk of accident!

Running in the engine

During the first 1,500 km, the driving style is decisive for successful the run-

ning in process is.

During the first 1,000 km the engine should not be pushed to more than 3/4

of the maximum permitted engine speed.



Starting-off and Driving

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Citigo - 2017 Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Citigo - 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info