Bedienungsanleitung Skoda Columbus (Seite 15 von 100) (Englisch)

512183

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Operation principle

Read and observe and on page 11 first.

The voice commands are only then to be spoken when the symbol is dis-

played in the device screen or in the display of the combined instrument



displayed.

The voice control system can usually be operated through the method “say

what you see” .

For example, you select the function key Dial number with the voice command

“Dial number”.

After switching on the voice control, the function buttons that can be selected

with a voice command are highlighted in green.

During voice control operation, the following symbols appear in the device

screen.

Symbol Meaning

 A message will be played

 A voice command is awaited

 The voice control is stopped

 A voice command is recognized

It is not necessary to wait for the end of message playback when the device is

playing a message. The device message can be ended by pressing the button



or by pressing the icon key



on the multifunction steering wheel. Then a

voice command can be issued. The voice control is therefore much faster.

Conditions in the menu Navigation

The destination address can be entered by saying the city, the street and the

house number (if it is included in the navigation data) in one step.

You can say the house number and a further additional address in the form of

a number where necessary. The device then offers the number combination it

has found if the house number and the additional address, exists in the street

entered where appropriate.

It is necessary to spell city and street names if the entered destination is loca-

ted in a country that has no voice control available for the language. The de-

vice indicates this through a text message on the screen.



not recognizing a voice command

Read and observe and on page 11 first.

If a voice command is not recognised, the device answers with Pardon? and

you can give a new command.

If the device does not recognise the second voice command, the help message

is provided again and you can give a new command.

If the device does not recognise the third voice command, the system plays

the Cancel. message and the dialogue is ended.

Correction of a voice command input

Read and observe and on page 11 first.

A voice command can be corrected, modified or re-entered by pressing the

button



or the icon key



on the multifunction steering wheel. However,

this is only possible if the symbol



is displayed on the screen.

You do not have to wait until the voice command is recognized by the device.

Stop/restore voice command input

Read and observe and on page 11 first.

Stop

In some menus, the process for voice command input can be stopped by turn-

ing the knob



This allows you more time for the voice command input.

When stopping, the symbol changes from





Restore

The procedure for voice command input can be restarted in one of the follow-

ing ways.

›

By pressing the function key



›

By pressing the button



on the device.

›

By pressing the icon key



on the multifunction steering wheel.



Device operation and settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Columbus Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Columbus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info