Bedienungsanleitung Skoda Columbus (Seite 74 von 100) (Englisch)

512183

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

It is possible to select an already calculated alternative route before the calcu-

lation of the remaining routes is completed.

Selecting the type of route will start the route guidance.

If no route selection is made within 30 s after the calculation of all routes, the

route guidance is automatically started according to the set route type

» page 78, Route options.

Route calculation for towing a trailer

When driving with a trailer or any other accessory connected to the trailer

socket, we recommend that you enable the trailer recognition, if necessary to

set the maximum speed for towing a trailer

. These features influence the

route calculation.

The activation of the trailer recognition is shown in the following.

›

Press the key



→



→ Driver assistance → Dynamic Road Sign Display

→ Trailer recognition (show road signs).

The setting of the maximum speed for towing a trailer is shown in the follow-

ing (applies to Superb).

›

Press the key



→



→ Driver assistance → Dynamic Road Sign Display

→ Top speed.

Most common routes

Read and observe on page 69 first.

The unit automatically stores up to three of the most commonly travelled

routes.

A route guidance to one of the stored routes can be started as long as no

guidance or route guidance takes place to one of these routes.

Route selection

›

In the split screen press the key Frequent routes → Show on map.

›

Select the desired route.

Then a selected rout is calculated and the route guidance starts.

The menu Frequent routes in the split screen can be shown / hidden

» page 78, Route options.

The most common routes stored can be deleted » page 79, Manage memory.



Route change in the map

Fig. 56 Route change in the map / route transit point

Read and observe

on page 69 first.

During route guidance, it is possible to change the route to a destination by a

transit point added to the route.

Add a transit point

›

Press in the Navigation menu the function key



→ Change route in map.

›

Touch the screen in the route field and move the cross-point to the desired

location on the map, e.g.

, move » Fig. 56.

The transit point

is added to the route » Fig. 56.

›

Press the function key



A route calculation occurs and route guidance starts.

Customize transit point

›

Press in the Navigation menu the function key



→ Change route in map.

›

Touch the transit point

and move to a different location on the map.

›

Press the function key



A route calculation occurs and route guidance starts.

Remove transit point

›

Press in the Navigation menu the function key



→ Change route in map.

›

Press the function key Del. waypoint.

›

Press the function key



A route calculation occurs and route guidance starts.



Applies for the Superb.

Navigation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Columbus Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Columbus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info