Bedienungsanleitung Skoda Octavia 2012 (Seite 21 von 248) (Englisch)

530453

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Auto Check Control

Car state

The Auto Check Control carries out a check of certain functions and vehicle com-

ponents. The check is performed constantly when the ignition is switched on,

both when the vehicle is stationary, as well as when driving.

Some operational faults, urgent repairs, service work or other information appear

in the display of the instrument cluster. The displays are shown with a red or yel-

low light symbol depending on the priority of the message.

The red symbols indicate danger (priority 1) while the yellow symbols indicate a

warning (priority 2). Information for the driver may also appear in addition to the

symbols ⇒ page 21.

There is at least one error message when the term Vehicle status is displayed in

the menu. After selecting this menu the first of the error messages is displayed.

Several error messages are shown on the display under the message e.g. 1/3. This

indicates that the first of a total of three error messages is displayed. Investigate

the displayed faults as soon as possible.

As long as the operational faults are not rectified, the symbols are always indica-

ted again. After the first display, the symbols are indicated without information for

the driver.

If a fault occurs, a warning signal will also sound in addition to the symbol and

text in the display:

● Priority 1 - three warning signals

● Priority 2 - one warning signal



Red symbols

A red symbol signals danger.

– Bring the vehicle to a stop.

– Switch the engine off.

– Investigate the function indicated.

– Obtain professional assistance.

Meaning of the red symbols:



Engine oil pressure too low ⇒ page 25



Overheated clutches of the automatic gear-

box DSG

⇒ page 29

Three successive warning signals will sound if a red symbol appears.



Yellow symbols

A yellow symbol signals a warning.

Check the relevant function as soon as possible.

The meaning of the yellow symbols:



Check engine oil level,

engine oil sensor faulty

⇒ page 29



Problem with en-

gine oil pressure

It is also important to have the vehicle inspected

without delay by a specialist garage. The informa-

tion about the maximum permissible engine speed

is displayed together with this symbol.

In certain countries, if a yellow symbol appears one warning signal will sound as

well.

If several operational faults of priority 2 exist, the symbols appear one after the

other and are each illuminated for about 5 seconds.



Set-up

You can change certain settings by means of the information display. The current

setting is shown on the information display in the respective menu at the top be-

low the line.

You can select the following information (depending on the equipment installed

on the vehicle):

● Language

● MFD Data

● Convenience

● Lights & Vision

● Time

● Winter tyres

19Instruments and warning lights

Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Octavia 2012 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Octavia 2012

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info