Bedienungsanleitung Skoda Rapid Spaceback - 2018 (Seite 121 von 256) (Englisch)

678237

121

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

Fig. 142 Swing/Blues: Insert the SD card

Inserting

›

Insert the SD card in the slot in the direction of arrow (with the cut end fac-

ing right), until it “locks into place” » Fig. 141 or » Fig. 142.

Removing

›

Before removing the SD card, go to the main Media menu and tap function

surface



→

Remove safely

›

Push down on the inserted SD memory card. The SD card “jumps” into the

eject position.

CAUTION

■

Do not use an SD card with a broken write protection “slide” - there is a risk

of damage to the SD card reader!

■

When using an SD card with an adapter, vehicle vibrations might cause the

card to fall out of the adapter.

USB input

Installation location of the USB input and information regarding its use

» page 73.

At the USB input, an audio source can be connected directly or via a connect-

ing cable.

›

To connect, insert the USB audio source into the appropriate input.

›

To disconnect the USB, go to the main Media menu and tap on the function

surface  →

Remove safely

›

Disconnect the audio source from the corresponding USB input.

Charging a USB audio source

With the ignition, the charging process starts automatically after the USB au-

dio source is connected (applies to audio sources where charging via the USB

connector is possible).

The charging efficiency can differ compared to charging from the usual mains

power supply.

Depending on the type of the connected external device and the frequency of

use, the charging current may not be sufficient to charge the battery of the

connected device.

Some connected audio sources may not recognise that they are being charg-

ed.

CAUTION

USB extension cables or reducers may impair the function of the connected

audio source.

Note

We recommend that you use extension cables from ŠKODA Original Accesso-

ries.

Bluetooth

player

Applies to Infotainment Columbus, Amundsen.

The Infotainment system allows you to play back audio files from a connected

Bluetooth

player using the A2DP and AVRCP audio profile.

With the Infotainment system, multiple devices can be paired using Blue-

tooth

, but only one of them can be used as a Bluetooth

player.

Connecting/disconnecting

›

To connect the Bluetooth

player to the Infotainment system, follow the

same instructions as for pairing the Infotainment system with a telephone

» page 127.

›

To disconnect the Bluetooth

player, end the connection in the list of paired

external devices » page 128.

Replacing the Bluetooth

player (applies to Infotainment Amundsen)

To replace a Bluetooth

player, which is also connected to the Infotainment

system as a telephone, a corresponding information message will be displayed

on the Infotainment screen.



119

Media

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Rapid Spaceback - 2018 Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Rapid Spaceback - 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info