Bedienungsanleitung Skoda Superb - 2009 (Seite 130 von 294) (Englisch)

678360

130

Zoom out

Zoom in

Vorherige Seite

1/294

Nächste Seite

Starting-off and Driving 129

Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

After you have released the rocker button out of the position SET, the speed you

have just stored is maintained at a constant speed without having to depress the

accelerator.

You can increase the speed by depressing the accelerator. Releasing the acceler-

ator will cause the speed to drop again to the set speed.

This does not apply, however, if you drive at a speed which is more than 10 km/h

higher than the set speed for a period of longer than 5 minutes. The stored speed

will be cancelled in the memory. You then have to re-store the desired speed.

One can reduce the speed in the usual manner. The system is switched off tempo-

rarily by actuating the brake or clutch pedal ⇒ page 129.

WARNING

First ensure that it is not too high for the traffic conditions which exist at that

moment before resuming the stored speed.

Changing a stored speed

You can also change the speed of the vehicle without depressing the

accelerator.

Faster

–You can increase the stored speed without depressing the acceler-

ator, by pressing the rocker button ⇒ page 128, fig. 145 in the RES

position.

– The speed of the car will increase continuously if you hold the rocker

button pressed in the RES position. Once the car has reached the

desired speed, release the rocker button. The set speed is then stored

in the memory.

Slower

– You can decrease the stored speed by pressing the rocker button

in the SET position.

– Holding down the rocker button pressed in the SET position will cause

the speed of the vehicle to reduce continuously. Once the car has

reached the desired speed, release the rocker button. The set speed is

then stored in the memory.

– If you release the rocker button when the car is travelling at a speed of

less than 30 km/h, the speed is not stored, the memory is erased. It is

then necessary to again store the speed with the rocker button in

the position SET after an increase in speed of the vehicle to more than

30 km/hour.

Switching off the cruise control system temporarily

–You can switch off the cruise control system temporarily by

depressing the brake pedal or clutch pedal, on models with auto-

matic gearbox and only with brake pedal.

– You can switch off temporarily the cruise control system, if you press

the switch in the middle position.

The set speed remains stored in the memory.

The Resumption of the stored speed is achieved by releasing the brake or clutch

pedal, on vehicles fitted with automatic gearbox only after releasing the brake pedal

and after shortly pressing the rocker button ⇒ page 128, fig. 145 into the posi-

tion RES.

WARNING

First ensure that it is not too high for the traffic conditions which exist at that

moment before resuming the stored speed.

s2dk.1.book Page 129 Wednesday, April 8, 2009 12:23 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Superb - 2009 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Superb - 2009

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info