Bedienungsanleitung Skoda Superb - 2010 (Seite 21 von 287) (Englisch)

678359

Zoom out

Zoom in

Vorherige Seite

1/287

Nächste Seite

Instruments and warning lights20

The multi-functional indicator is equipped with two automatic memories. The

selected memory is displayed in the middle of the display field  page 19, fig. 18.

The data of the single-trip memory (memory 1) is shown if a 1 appears in the display.

A 2 shown in the display means that data relates to the total distance memory

(memory 2).

Switching over the memory with the help of the button  fig. 19 on the windscreen

wiper lever or with the help of the button on the multifunction steering wheel*

 fig. 19.

Single-trip memory (memory 1)

The single-trip memory collates the driving information from the moment the ignition

is switched on until it is switched off. New data will also flow into the calculation of the

current driving information if the trip is continued within 2 hours after switching off

the ignition. The memory will be is automatically erased, on the other hand, if the trip

is interrupted for more than 2 hours.

Total-trip memory (memory 2)

The total distance driven memory gathers data from any number of individual jour-

neys up to a total of 19 hours and 59 minutes driving or 1.999 kilometres driven and

on vehicles which are fitted with information display* up to a total of 99 hours and 59

minutes driving or 9.999 kilometres driven. The memory is deleted when either of

these limits is reached and the calculation starts from anew.

The total-trip memory will not, contrary to the single-trip memory, be deleted after a

period of interruption of driving of 2 hours.

Note

All information in the memory 1 and 2 is erased if the battery of the vehicle is

disconnected.

Operating with the buttons on the windshield wiper lever and on

the multifunction steering wheel*

Fig. 19 Multi-functional indicator: Controls on the windshield wiper lever / controls on the

multifunction steering wheel

The rocker switch and the button are located on the windshield wiper lever

 fig. 19. Switching over and resetting is performed with the handwheel  fig. 19

on the multifunction steering wheel.

Selecting the memory

– After briefly pressing the button on the windshield wiper lever or by briefly

pressing the button on the multifunction steering wheel, you can select the

desired memory.

Selecting the functions with the help of the windshield wiper lever

– Press the top or bottom rocker switch for longer than 0.5 seconds. In this way,

call up in sequence the individual functions of the multi-functional indicator.

Selecting the functions with the help of the multifunction steering

wheel

– By pressing the button , you can call up the menu of the multi-functional indi-

cator.

– Turn the handwheel upwards or downwards. In this way, call up in sequence

the individual functions of the multi-functional indicator.

– Short-term pressing of the button allows to select the highlighted function.

s3fg.2.book Page 20 Friday, April 30, 2010 12:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Superb - 2010 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Superb - 2010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info