Bedienungsanleitung Skoda Swing - 2013 (Seite 7 von 14) (Englisch)

678546

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Radio

Using the system

Switch between wavebands

›

Press the button

RADIO

for longer.

Your radio is equipped with FM and AM wavebands. These are divided in 6 memo-

ry levels, i.e. 3 levels for FM and 3 levels for AM. On each of these levels there are

6 memory slots available.

Activation of the FM waveband

Activate the FM waveband by pressing the

RADIO

button for a long time, followed

by the FM

selection button. By briefly pressing the

RADIO

button, you can

switch between the memory levels FM1, FM2 and FM3.

Activation of the AM waveband

Activate the AM waveband by pressing the

RADIO

button for a long time, followed

by the AM

button. By briefly pressing the

RADIO

button, you can switch be-

tween the memory levels AM1, AM2 and AM3.



Searching for and storing radio stations

Manual search

›

Set the frequency of the desired radio station by turning the settings knob

Store station

›

After selecting the radio station, press the selection button

, on which the

station should be stored and hold it pressed in until the radio station briefly

switches to mute and a brief signal sounds.

Automatic station finding with storing the radio stations

›

Press the button

. An automatic station finding is started during which the 6

stations with the strongest signal in the memory level FM3 and/or AM3 are stor-

ed.

When the process of storing the radio stations on the selection buttons

is com-

plete, you can press any selection button

to call up the desired radio station.

Note

The stored radio stations of the current waveband are updated and stored once

again in the memory level FM3 and/or AM3 by repeatedly pressing the button



Function SCAN

The stations of a waveband can be played briefly one after the other (for ten sec-

onds).

›

When pressing the settings knob

, the radio automatically searches all availa-

ble stations of the current waveband.

›

To call up the original radio station, press the selection button CANCEL

›

The automatic station search is terminated by pressing the function button OK

. The current radio station remains selected.

›

To choose other radio stations, press the selection button SKIP



RDS Function

Certain radio stations transmit additional text information - designated as radio

text.

›

The information of the radio text is displayed by pressing the button

INFO

Note

■

The text information must not be available to all radio stations.

■

Depending upon the quality of the received signal, the radio needs a specific

time, in order to correctly read all the illustrated characters.



Traffic information function

Activating/deactivating traffic reports

Press the

button, and TP will be displayed. If a set radio station does not

transmit traffic reports, the radio searches for a station that does.

An incoming traffic report will automatically interrupt CD playback. At the end of

the traffic report, the radio automatically returns to the original play function.

The traffic information function is turned off by pressing the

button again and

the TP symbol goes out.



Radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Swing - 2013 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Swing - 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info