Bedienungsanleitung Skytec 178.788 (Seite 3 von 14) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

766706

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

SPL300-400 - 3 -

Congratulations to the purchase of our SPL Amplifier.

Read the instructions thoroughly prior to using the unit.

SAFETY INSTRUCTIONS

 Hearing damage:

Loudspeakers are easily generating high sound

pressure levels (SPL) sufficient to cause permanent

hearing damage to performers, production crew and

audience members. Care should be taken to avoid

prolonged exposure to SPL in excess of 85 dB.

 Make sure that the amplifier is switched off when the

speaker box is connected or disconnected.

 Do not overload the amplifier or speakers to avoid

damage to the components.

 Do not plug or unplug the unit with wet hands.

 If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

 Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

 During a thunderstorm or if the unit will not be used for

a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

 If the unit has not been used for a longer period of

time, condensation may occur. Let the unit reach

room temperature before you switch it on. Never use

the unit in humid rooms or outdoors.

 During operation, the housing becomes very hot. Do

not touch it during operation and immediately after.

 Do not use cleaning sprays to clean the switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice

from a specialist.

 Do not force the controls.

 Do not place an open fire (candle, etc.) on top or next

to the box - FIRE HAZARD

 Make sure that the amplifier is placed on a stable,

solid surface.

 Do not place liquids on the amplifier and protect it

against humidity. Humidity can shorten the life time

considerably.

 If the unit is damaged to an extent that internal

parts are visible, DO NOT connect the unit and DO

NOT switch it on. Contact your dealer.

 Never try to repair the unit yourself. It does not

contain any user serviceable parts. All repairs must

be carried out by a qualified technician.

 Set the amplifier to the lowest volume prior to

switching it on.

 Keep the unit out of the reach of children.

 Switch the unit off prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the unit.

 Make sure that the mains lead cannot be damaged

when people walk on it. Check the mains lead

before every use for damages and faults!

Protect your environment. Recycle packing

material whenever possible.

Do not throw a faulty unit into normal

household waste but bring it to a special

collection point. A large part of it can be

recycled.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit.

This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by

inappropriate use or disrespect of the warnings contained in this manual. SkyTronic cannot be held responsible for

personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all

damages in whatever form.

CONNECTIONS

First of all, check the specifications of the amplifier if it is suitable for your speaker boxes. Pay particular attention

to the power rating and impedance. Check if the amplifier is switched off. If yes, you can switch on the speakers.

PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every

side i.e. the + of the amplifier must be connected to the + of the speaker box. If the connections are inverted, the

sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance

between the amplifier and the speaker.

LAYOUT:

Front Panel

1. Power switch

2. Power on/off indicator

3. Channel A & B volume

control

4. Signal LED Channel A & B

5. Clip indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skytec 178.788 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info