490939
8
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
Different ways of connecting the combined microphone input
If you want to use the XLR input unbalanced, connect the centre pin to the ground
1 = Ground
2 = + ( Live)
3 = - ( Return )
FUNCTIONS
Front Panel
1. POWER On/Off switch
2. INPUT SELECTOR (4x) Selects the input signal for both channels
3. TREBLE (4x) Treble control for both channels
4. BASS (4x) Bass control for both channels
5. CHANNEL (4x) Slider controls for the volume of both channels
6. MICROPHONE 6.3mm/XLR combi jack for a microphone
7. MIC LEVEL Setting of the microphone output level
8. TALKOVER Switch that attenuates the sound of every channel when the
mic is used
9. VU-METER Displays the strength of the output signal
10. MASTER Master control for the volume of the output signal
11. ASSIGN Channel selection knob for the crossfader function
12. CROSSFADER Fast fading between the channels
13. CUE SELECT Selects the channel to be heard through the headphones
14. PFL LEVEL Sets the volume to the microphone output
15. HEADPHONE 6.3mm Jack socket for the headphones
Rear Panel
16. EARTH Earth connector for the ground wire from the turntables
17. REC RCA sockets for connection to a recorder
18. MASTER RCA sockets to the amplifier
19/21 CHANNEL PHONO & LINE RCA sockets for connection to a PHONO or LINE (CD player,
tuner, etc.) for the different channels
20. MIC 6.3mm Jack connector for the microphone
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Skytec TEC 350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info