687280
30
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
6 Electrical Connection SMA Solar Technology AG
30 SB13_21TL-IA-en-65 Installation Manual
6.3.3 Connecting Additional Earthing
You can carry out additional earthing of the inverter enclosure if local requirements stipulate
additional earthing or equipotential bonding. This will prevent touch current if the original protective
conductor fails.
Additional required material (not included in scope of delivery):
Ring terminal lug M6
1 earthing cable
Cable requirement:
Earthing cable cross-section: max. 16 mm²
Procedure:
1. Strip the earthing cable insulation.
2. Thread ring terminal lug onto earthing cable.
3. Align washer, earthing cable with ring terminal lug
and conical spring washer on the cheese-head
screw M6x12. The teeth of the conical spring
washer must be facing the metal shackle on the
inverter.
4. Insert the cheese-head screw through the metal
shackle on the inverter and screw onto the wall
mounting bracket (torque: 6 Nm).
6.4 DC Connection
6.4.1 Requirements for DC Connection
Requirements for the PV modules:
All PV modules must be of the same type.
The same number of series-connected PV modules must be connected to all strings.
All PV modules must have the same alignment.
All PV modules must have the same tilt angle.
The maximum input current per string must be complied with and must not exceed the
through-fault current of the DC connectors (see Section12 "Technical Data", page60).
The thresholds for the input voltage and the input current of the inverter must be observed
(see Section12 "Technical Data", page60).
On the statistically proven coldest day of the year, the open-circuit voltage of the PV array
should never exceed the maximum input voltage of the inverter.
The positive connection cables of the PV modules must be fitted with the positive DC connectors
(for information on assembling DC connectors, see the DC connector installation manual).
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für SMA Sunny Boy 1600TL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von SMA Sunny Boy 1600TL

SMA Sunny Boy 1600TL Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info